Automotive integration

CIE Automotive EDI integration

How EDI and API integration with CIE Automotive typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with CIE Automotive.

At a glance

CIE Automotive integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific CIE Automotive program or a customer relationship.

Illustration of a factory with a conveyor carrying boxes, representing the automotive industry that CIE Automotive operates in.
Industry. Automotive: where CIE Automotive operates.
Workflow diagram: your ERP and warehouse systems exchange documents with CIE Automotive through ECOM. You send 856, 810, 855; you receive 830, 862, 850; 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor CIE Automotive 856 810 855 856 810 855 830 862 850 830 862 850 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about CIE Automotive

Tell us which documents you exchange with CIE Automotive, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with CIE Automotive.

  • Review of CIE Automotive's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
CIE Automotive

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How CIE Automotive integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2 or SFTP · EDI network (VAN) · API or web portal
CIE AutomotiveIts program, documents and requirements
  1. ConfirmConfirm your CIE Automotive program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding CIE Automotive integration

Who this is for: Tier 2 and component suppliers, materials providers and logistics partners that supply CIE Automotive, plus customers that buy from it, and their planning and EDI teams.

Scope: This guide describes typical practice for this kind of trading relationship; CIE Automotive's own program details are confirmed during onboarding.

CIE Automotive supplies automotive components. ECOM's directory lists it under automotive components. Suppliers to a tier 1 company usually receive purchase orders and schedules, ship to its plants or distribution points, and work to its labeling and quality rules.

Programs run by an automotive supplier tend to grow rules over time, so a setup that is easy to change and monitor is worth more than a one-time build. CIE Automotive's own EDI or API specification is not part of this guide and no CIE Automotive document was read: treat what follows as typical practice for an automotive supplier, and confirm the documents, X12 version, delivery method and testing steps with CIE Automotive.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where CIE Automotive integration gets complicated

Typical requirements—confirm with your trading partner.

Multi-tier schedule flow-down

A tier 1 passes customer schedules down to its suppliers. Changes upstream arrive as new releases that must be handled quickly.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes CIE Automotive has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Sequence and kitting

Some programs deliver parts in sequence or in kits, which raises label and ship notice precision.

How ECOM helps: ECOM connects shipment and status documents to your ERP, WMS or TMS and shows where each one stands, so late or missing messages are seen early.

What you gain: Teams see current status, and fewer shipments are held up by missing documents.

Catalog and fitment accuracy

Online parts sellers depend on part and fitment data and fast drop-ship turnaround. Errors in either become returns.

How ECOM helps: ECOM maps item, price and pack data between your systems and CIE Automotive's format and validates it before it is sent, so mismatches are caught on your side.

What you gain: Fewer rejections caused by data that does not match what CIE Automotive has on file.

Launch of a new program

New programs start with new parts, labels and schedules that all need testing.

How ECOM helps: ECOM runs onboarding as a project: we confirm CIE Automotive's requirements with you, map the documents, build the connection and run test cycles until CIE Automotive accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Workflows

Typical CIE Automotive business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not CIE Automotive's published process.

Schedule to invoice

  1. 1Receive 830 planning schedule
  2. 2Receive 862 shipping schedule
  3. 3Ship and send 856
  4. 4Send 810 invoice

Purchase order cycle (less common)

  1. 1Receive 850 purchase order
  2. 2Send 855 acknowledgment
  3. 3Deliver goods
  4. 4Invoice and reconcile

Documents and APIs

CIE Automotive documents by program

General guidance. We could not verify CIE Automotive's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not CIE Automotive's confirmed requirements. Confirm the list, versions and programs with CIE Automotive.

DocumentNameDirectionProgramStatusPurpose
830 Planning Schedule with Release Capability From CIE Automotive Not stated General guidance Typically gives forecasts and planned requirements by item and date.
862 Shipping Schedule From CIE Automotive Not stated General guidance Typically gives firm shipping requirements, alone or alongside the planning schedule.
856 Ship Notice/Manifest To CIE Automotive Not stated General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice To CIE Automotive Not stated General guidance Typically bills for what shipped, matched against the order.
850 Purchase Order From CIE Automotive Not stated General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment To CIE Automotive Not stated General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2 or SFTP

    Many companies exchange EDI files directly over AS2 or SFTP.

    General guidance

  • EDI network (VAN)

    Many suppliers connect through a value-added network that delivers files to and from the partner and keeps an audit trail.

    General guidance

  • API or web portal

    Some programs use REST or SOAP APIs, a supplier portal or a cloud EDI service for some documents. A login is usually required for portals.

    General guidance

Challenges

Common integration challenges

  • Schedule volatility

    Release changes flow down quickly and need fast handling.

  • Labeling

    Labels and ship notices must agree. Details depend on your agreement with CIE Automotive.

  • Cumulative accounting

    Cumulative quantity mismatches are a common source of disputes.

  • Multiple customers

    Each customer program may add its own variations.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by CIE Automotive. ECOM works from them during mapping and testing.

Automation options for CIE Automotive suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet CIE Automotive's labeling and ship notice requirements, and see what needs action. CIE Automotive sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect CIE Automotive documents to your ERP

ECOM connects the documents you exchange with CIE Automotive to your ERP and warehouse systems, so orders post without re-keying and ship notices and invoices come from the data you already hold.

Industry

Automotive

See how ECOM supports EDI for automotive suppliers and manufacturers.

Industry

Industrial Manufacturing

See how ECOM supports supplier schedules, shipping and invoicing for manufacturers.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with CIE Automotive typically works

The documents, their order and the timing are CIE Automotive's to set; this is the general sequence most programs of this kind follow.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with CIE Automotive.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From CIE Automotive to you

    Typically gives forecasts and planned requirements by item and date.

  2. 862 Shipping Schedule

    From CIE Automotive to you

    Typically gives firm shipping requirements, alone or alongside the planning schedule.

  3. 856 Ship Notice/Manifest

    From you to CIE Automotive

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to CIE Automotive

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Purchase-order program

  1. 850 Purchase Order

    From CIE Automotive to you

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  2. 855 Purchase Order Acknowledgment

    From you to CIE Automotive

    Typically confirms an order, or reports changes to quantities, prices or dates.

  3. 856 Ship Notice/Manifest

    From you to CIE Automotive

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to CIE Automotive

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your CIE Automotive program

Each request goes to an ECOM EDI specialist with CIE Automotive's name attached, so the reply starts from your program.

  • Review CIE Automotive's requirements

    Send us CIE Automotive's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect CIE Automotive to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each CIE Automotive document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match CIE Automotive's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

CIE Automotive integration FAQs

Does CIE Automotive use EDI with suppliers?

Automotive suppliers commonly exchange EDI with their own suppliers. This page does not include CIE Automotive's requirements.

Can ECOM help a tier 2 supplier?

Yes. ECOM maps schedules, ship notices and invoices between a customer's format and your ERP and monitors every file. This page does not indicate a relationship with CIE Automotive.

Which EDI documents are typical for an automotive supplier?

Typical documents are 830, 862, 856, 810, 850, 855, 997. That is general practice, not CIE Automotive's published list.

How does onboarding with CIE Automotive usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on CIE Automotive's requirements, test cycles and your ERP.

Does this guide mean CIE Automotive endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by CIE Automotive.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. CIE Automotive sets its own requirements and can change them at any time; your CIE Automotive implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • CIE Automotive: company description Background, not checked against a company source The one-sentence description of CIE Automotive comes from general public knowledge and was not checked against CIE Automotive's own website for this page.
  • CIE Automotive: no company document read Background, not checked against a company source No CIE Automotive supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request CIE Automotive integration assistance

Tell us about your CIE Automotive program, documents and ERP. We will outline the connection, mapping and testing plan.