Automotive integration

Ford EDI integration for automotive suppliers

A guide for suppliers connecting with Ford, covering planning and shipping schedules, ship notices, sequencing and ERP integration.

At a glance

Ford integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Ford program or a customer relationship.

Illustration of a car on a road, representing the automotive industry that Ford operates in.
Industry. Automotive: where Ford operates.
Workflow diagram: your ERP and warehouse systems exchange documents with Ford through ECOM. You send 856; you receive 830, 862, 861, 866. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor Ford 856 856 830 862 861 866 830 862 861 866
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Ford

Tell us which documents you exchange with Ford, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Ford.

  • Review of Ford's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Ford

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Ford integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringDirect EDI connection · UN/EDIFACT · Supplier portals
FordIts program, documents and requirements
  1. ConfirmConfirm your Ford program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Ford integration

Who this is for: Tier-one and tier-two suppliers shipping production and service parts to Ford plants and facilities, and the EDI and logistics teams supporting them.

Automotive supply chains run on schedules rather than one-off orders, and Ford is no exception. Suppliers typically receive planning schedules that forecast demand and authorize material and fabrication, followed by shipping schedules that specify near-term delivery requirements. Suppliers respond with advance ship notices describing each shipment, and receive receiving advice confirming what arrived.

Integration quality matters because these documents drive production. Schedule changes need to reach production planning quickly, and ship notices must be accurate and timely so that plants can plan receiving. Container labels must match ship notice data. Some suppliers also support production sequencing, where parts are delivered in the exact order of vehicles on the line.

Ford publishes its EDI specifications and connection request process through its GEC Hub and Global Trading Partner Connection Management (GTPCM) site, which lists supported transactions and connection protocols such as AS2, OFTP2 and SFTP. Document sets and versions vary by plant, region and supply model, so suppliers should obtain Ford's current specifications there or from their Ford business sponsor.

Workflows

Typical Ford business workflows

The steps summarize the documents below. Where a step is not in Ford's published documents, it reflects common practice.

Schedule-driven production supply

  1. 1Receive 830 planning schedule
  2. 2Plan materials and production
  3. 3Receive 862 shipping schedule
  4. 4Ship and label containers
  5. 5Send 856 ship notice
  6. 6Receive 861 receiving advice

Documents and APIs

Ford documents by program

Every document this guide names, with the program it applies to and its status. Required, optional and conditional come from Ford's published documents cited below; documents marked general guidance are common in this industry but not confirmed for Ford.

DocumentNameDirectionProgramStatusPurpose
830 Planning Schedule with Release Capability From Ford Not stated General guidance Shares forecasts and authorizes material and fabrication.
862 Shipping Schedule From Ford Not stated General guidance Gives firm near-term delivery requirements.
856 Advance Ship Notice To Ford Not stated General guidance Describes parts, quantities and containers before arrival.
861 Receiving Advice/Acceptance Certificate From Ford Not stated Named; level not stated Confirms what was received.
866 Production Sequence From Ford Not stated General guidance Specifies delivery order for sequenced parts where used.
850 Purchase Order From Ford Not stated General guidance Orders parts or materials outside schedule-based programs.

Connectivity

How companies connect

  • Direct EDI connection

    Suppliers commonly connect to Ford's EDI environment directly or through an approved network provider.

    General guidance

  • UN/EDIFACT

    Suppliers serving Ford operations outside North America may exchange EDIFACT messages such as DELFOR and DESADV.

    General guidance

  • Supplier portals

    Ford's supplier systems complement EDI for requirements, quality and logistics information.

    General guidance

Challenges

Common integration challenges

  • Frequent schedule changes

    Releases change often and must flow into production planning without manual re-entry.

  • Ship notice timing and accuracy

    Plants rely on ship notices to plan receiving, so they must be accurate and sent on time.

  • Container labeling

    Labels must match ship notice data at the container level.

  • Payment reconciliation

    Payments based on receipts must be reconciled against what was shipped.

Automation options for Ford suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet Ford's labeling and ship notice requirements, and see what needs action. Ford sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

General EDI flow

How EDI with Ford typically works

The documents, their order and the timing are Ford's to set; this is the general sequence most programs of this kind follow.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with Ford.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From Ford to you

    Shares forecasts and authorizes material and fabrication.

  2. 862 Shipping Schedule

    From Ford to you

    Gives firm near-term delivery requirements.

  3. 856 Advance Ship Notice

    From you to Ford

    Describes parts, quantities and containers before arrival.

  4. 861 Receiving Advice/Acceptance Certificate

    From Ford to you

    Confirms what was received.

  5. 866 Production Sequence

    From Ford to you

    Specifies delivery order for sequenced parts where used.

Purchase-order program

  1. 850 Purchase Order

    From Ford to you

    Orders parts or materials outside schedule-based programs.

  2. 856 Advance Ship Notice

    From you to Ford

    Describes parts, quantities and containers before arrival.

  3. 861 Receiving Advice/Acceptance Certificate

    From Ford to you

    Confirms what was received.

  4. 866 Production Sequence

    From Ford to you

    Specifies delivery order for sequenced parts where used.

Working from Ford's published specification?

Tell ECOM which program and documents apply to you. We read the published specification with you, map it to your systems and test against it. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Ford program

Each request goes to an ECOM EDI specialist with Ford's name attached, so the reply starts from your program.

  • Review Ford's requirements

    Send us Ford's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Ford to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Ford document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match Ford's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

Ford integration FAQs

Which EDI documents do Ford suppliers typically use?

Automotive suppliers commonly exchange the 830 planning schedule, 862 shipping schedule, 856 ship notice and 861 receiving advice, with documents such as the 866 for sequenced parts. Ford's EDI specification list on its GTPCM site is the authoritative reference for your program.

Does Ford support EDIFACT?

Ford's European EDI pages describe OFTP2 connections, direct or through a VAN or ENX, for European plants. Confirm the standard and version for each Ford region you supply with Ford.

How should Ford schedules reach our ERP?

Schedules should be translated and loaded into ERP or MRP planning automatically, so material plans reflect the latest releases.

Is ECOM an approved Ford provider?

This page is an integration guide and does not indicate an approval or partnership with Ford. ECOM builds integrations to published requirements.

Sources and accuracy

This guide summarizes publicly available information as of October 2026. Ford sets its own requirements and can change them at any time; your Ford implementation guide, supplier portal or account contact is the authoritative source for your program.

Request Ford integration assistance

Tell us about your Ford program, documents and ERP. We will outline the connection, mapping and testing plan.