Automotive integration

MAHLE EDI integration

What MAHLE publishes about supplier EDI (EDI required, classic EDI or its supplier portal, a ship notice by EDI within 30 minutes after pick-up, rolled out by plant) and what is typical practice, with how ECOM helps.

At a glance

MAHLE integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific MAHLE program or a customer relationship.

Illustration of a factory with a conveyor carrying boxes, representing the automotive industry that MAHLE operates in.
Industry. Automotive: where MAHLE operates.
Workflow diagram: your ERP and warehouse systems exchange documents with MAHLE through ECOM. You send ASN, 810, 855; you receive 830, 862, 850; 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor MAHLE ASN 810 855 ASN 810 855 830 862 850 830 862 850 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about MAHLE

Tell us which documents you exchange with MAHLE, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with MAHLE.

  • Review of MAHLE's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
MAHLE

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How MAHLE integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringClassic EDI · SAP Business Network (Ariba), for ASNs · Supplier portal
MAHLEIts program, documents and requirements
  1. ConfirmConfirm your MAHLE program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding MAHLE integration

Who this is for: Tier 2 and component suppliers, materials providers and logistics partners that supply MAHLE, plus customers that buy from it, and their planning and EDI teams.

Scope: Documented by MAHLE (two guidelines read 2026-11-16): EDI, via classic EDI and/or its supplier portal, is mandatory; the ASN is due within 30 minutes of pick-up, rolled out by plant, supply agreement first. Its EDI Guideline and other formats were not read.

MAHLE supplies engine, filtration and thermal management systems. ECOM's directory lists it under powertrain and thermal. Suppliers to a tier 1 company usually receive purchase orders and schedules, ship to its plants or distribution points, and work to its labeling and quality rules.

MAHLE publishes logistics guidelines for suppliers. Documented by MAHLE: electronic communication is a mandatory prerequisite, through classic EDI and/or the alternative supplier portal MAHLE provides. The Global Logistics Guideline (all MAHLE locations worldwide; your supply agreement takes precedence, and regional or plant rules apply where they differ) asks for the advance ship notice (ASN) by EDI immediately after the forwarder picks up the goods, not more than 30 minutes after pick-up. The ASN Guideline (v1.0) gives the same 30-minute limit, counted from when the goods leave the supplier's shipping dock, and says MAHLE is rolling ASN use out across its plants in stages. Confirm with your MAHLE plant whether and from when the rule applies to your shipments. Message formats outside MAHLE Filtersysteme and its European subsidiaries were not read; the other documents on this page are typical practice to confirm with MAHLE.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where MAHLE integration gets complicated

Typical requirements—confirm with your trading partner.

Multi-tier schedule flow-down

A tier 1 passes customer schedules down to its suppliers. Changes upstream arrive as new releases that must be handled quickly.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes MAHLE has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Sequence and kitting

Some programs deliver parts in sequence or in kits, which raises label and ship notice precision.

How ECOM helps: ECOM connects shipment and status documents to your ERP, WMS or TMS and shows where each one stands, so late or missing messages are seen early.

What you gain: Teams see current status, and fewer shipments are held up by missing documents.

Engineered parts and cumulative quantities

Engineered components move on schedules with cumulative quantity tracking. Differences between shipped and received cumulatives create disputes unless both sides use the same counts.

How ECOM helps: ECOM monitors each document and acknowledgment, flags rejected, late or mismatched ones and routes each exception to a named owner with the document history attached.

What you gain: Problems are corrected before they turn into deductions, write-offs or delayed payment.

Quality and traceability data

Quality programs often ask for lot or serial traceability on shipments.

How ECOM helps: ECOM maps item, price and pack data between your systems and MAHLE's format and validates it before it is sent, so mismatches are caught on your side.

What you gain: Fewer rejections caused by data that does not match what MAHLE has on file.

Workflows

Typical MAHLE business workflows

The steps summarize the documents below. Where a step is not in MAHLE's published documents, it reflects common practice.

Schedule to invoice

  1. 1Receive schedule or call-off
  2. 2Ship, then send ASN after pick-up
  3. 3Send invoice
  4. 4Reconcile cumulative quantities

Purchase order cycle (typical)

  1. 1Receive 850 purchase order
  2. 2Send 855 acknowledgment
  3. 3Deliver goods
  4. 4Invoice and reconcile

Documents and APIs

MAHLE documents by program

Every document this guide names, with the program it applies to and its status. Required, optional and conditional come from MAHLE's published documents cited below; documents marked general guidance are common in this industry but not confirmed for MAHLE.

DocumentNameDirectionProgramStatusPurpose
ASN Advance ship notice To MAHLE Not stated Named; level not stated Documented by MAHLE: sent by EDI for each shipment after pick-up, not more than 30 minutes later (Global Logistics Guideline, worldwide scope, with the supply agreement and regional rules taking precedence; ASN Guideline v1.0 counts from leaving the shipping dock and says plant rollout is in stages), so confirm with your plant that it applies to you. MAHLE Filtersysteme and its European subsidiaries document VDA 4913 / EDIFACT DESADV D97A; the format for other plants was not read.
830 Planning Schedule with Release Capability From MAHLE Not stated General guidance Typically gives forecasts and planned requirements by item and date.
862 Shipping Schedule From MAHLE Not stated General guidance Typically gives firm shipping requirements, alone or alongside the planning schedule.
810 Invoice To MAHLE Not stated General guidance Typically bills for what shipped, matched against the order.
850 Purchase Order From MAHLE Not stated General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment To MAHLE Not stated General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • Classic EDI

    Documented by MAHLE: business data is exchanged by EDI, and the connection is made through classic EDI and/or the alternative supplier portal MAHLE provides. A supplier without EDI contacts MAHLE to have it installed.

    From MAHLE's published documents

  • SAP Business Network (Ariba), for ASNs

    Documented in MAHLE's ASN Guideline v1.0: MAHLE offers training on sending ASNs through SAP Business Network (Ariba), which the guideline names as its web route. The Global Logistics Guideline does not name this portal, so confirm with your plant whether it is open to you and for which documents.

    From MAHLE's published documents

  • Supplier portal

    MAHLE operates a supplier portal for purchasing and logistics guidelines; which exchanges run through it depends on the plant and program.

    From MAHLE's published documents

Challenges

Common integration challenges

  • Schedule volatility

    Release changes flow down quickly and need fast handling.

  • Labeling

    Labels and ship notices must agree. Details depend on your agreement with MAHLE.

  • Cumulative accounting

    Cumulative quantity mismatches are a common source of disputes.

  • Multiple customers

    Each customer program may add its own variations.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by MAHLE. ECOM works from them during mapping and testing.

Automation options for MAHLE suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet MAHLE's labeling and ship notice requirements, and see what needs action. MAHLE sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect MAHLE documents to your ERP

ECOM connects the documents you exchange with MAHLE to your ERP and warehouse systems, so orders post without re-keying and ship notices and invoices come from the data you already hold.

Industry

Automotive

See how ECOM supports EDI for automotive suppliers and manufacturers.

Industry

Industrial Manufacturing

See how ECOM supports supplier schedules, shipping and invoicing for manufacturers.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with MAHLE typically works

The documents, their order and the timing are MAHLE's to set; this is the general sequence most programs of this kind follow.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with MAHLE.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From MAHLE to you

    Typically gives forecasts and planned requirements by item and date.

  2. 862 Shipping Schedule

    From MAHLE to you

    Typically gives firm shipping requirements, alone or alongside the planning schedule.

  3. ASN Advance ship notice

    From you to MAHLE

    Documented by MAHLE: sent by EDI for each shipment after pick-up, not more than 30 minutes later (Global Logistics Guideline, worldwide scope, with the supply agreement and regional rules taking precedence; ASN Guideline v1.0 counts from leaving the shipping dock and says plant rollout is in stages), so confirm with your plant that it applies to you. MAHLE Filtersysteme and its European subsidiaries document VDA 4913 / EDIFACT DESADV D97A; the format for other plants was not read.

  4. 810 Invoice

    From you to MAHLE

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Purchase-order program

  1. 850 Purchase Order

    From MAHLE to you

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  2. 855 Purchase Order Acknowledgment

    From you to MAHLE

    Typically confirms an order, or reports changes to quantities, prices or dates.

  3. ASN Advance ship notice

    From you to MAHLE

    Documented by MAHLE: sent by EDI for each shipment after pick-up, not more than 30 minutes later (Global Logistics Guideline, worldwide scope, with the supply agreement and regional rules taking precedence; ASN Guideline v1.0 counts from leaving the shipping dock and says plant rollout is in stages), so confirm with your plant that it applies to you. MAHLE Filtersysteme and its European subsidiaries document VDA 4913 / EDIFACT DESADV D97A; the format for other plants was not read.

  4. 810 Invoice

    From you to MAHLE

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Working from MAHLE's published specification?

Tell ECOM which program and documents apply to you. We read the published specification with you, map it to your systems and test against it. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your MAHLE program

Each request goes to an ECOM EDI specialist with MAHLE's name attached, so the reply starts from your program.

  • Review MAHLE's requirements

    Send us MAHLE's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect MAHLE to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each MAHLE document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match MAHLE's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

MAHLE integration FAQs

Does MAHLE use EDI with suppliers?

Yes. MAHLE's Global Logistics Guideline calls electronic communication a mandatory prerequisite, through classic EDI and/or MAHLE's alternative supplier portal, and asks for an electronic ship notice after pick-up. Its ASN Guideline names SAP Business Network (Ariba) as a way to send ASNs; confirm with your plant whether it is open to you.

Can ECOM help a tier 2 supplier?

Yes. ECOM maps schedules, ship notices and invoices between a customer's format and your ERP and monitors every file. This page does not indicate a relationship with MAHLE.

Which EDI documents are typical for an automotive supplier?

MAHLE documents the advance ship notice and a 30-minute limit after pick-up, and says ASN use is being rolled out across its plants in stages, so confirm with your plant that it applies. Schedules, orders, acknowledgments and invoices are typical practice, not MAHLE's published list, and formats depend on the plant.

How does onboarding with MAHLE usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on MAHLE's requirements, test cycles and your ERP.

Does this guide mean MAHLE endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by MAHLE.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. MAHLE sets its own requirements and can change them at any time; your MAHLE implementation guide, supplier portal or account contact is the authoritative source for your program.

Request MAHLE integration assistance

Tell us about your MAHLE program, documents and ERP. We will outline the connection, mapping and testing plan.