Automotive integration

Shiloh Industries EDI: legacy documents and migration

Shiloh Industries sold its assets after a 2020 bankruptcy. How its EDI documents were typically exchanged, and how to reconcile, archive and move that volume to current partners.

Company status: Shiloh Industries filed for Chapter 11 in August 2020 and sold substantially all of its assets to an affiliate of MiddleGround Capital. This guide is for teams that still hold Shiloh documents, parts orders or invoices. Checked 2026-11-12 · source.

At a glance

Shiloh Industries integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Shiloh Industries program or a customer relationship.

Illustration of a factory with a conveyor carrying boxes, representing the automotive industry that Shiloh Industries operates in.
Industry. Automotive: where Shiloh Industries operates.
Workflow diagram: your ERP and warehouse systems exchange documents with Shiloh Industries through ECOM. You send 856, 810, 855; you receive 830, 862, 850; 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor Shiloh Industries 856 810 855 856 810 855 830 862 850 830 862 850 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Shiloh Industries

Tell us which Shiloh Industries documents and open items you still hold, which ERP you run and where the volume is moving. A specialist will outline how to reconcile, archive and migrate. This page is a guide based on typical practice; it does not mean ECOM works with Shiloh Industries.

  • Review of the Shiloh Industries documents and open items you still hold
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Shiloh Industries

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Shiloh Industries integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringHistorical connection (not for new setups) · Replacement partners · Archive and retrieval
Shiloh IndustriesLegacy program
  1. InventoryList the Shiloh Industries documents, partners and open items you still hold.
  2. MapMap the same internal data to the partners that replace it.
  3. ConnectStand up the replacement connections.
  4. TestRun parallel tests before cutover.
  5. RetireRetire the old connection with monitoring in place.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Shiloh Industries integration

Who this is for: Teams that still hold Shiloh Industries documents, claims or invoices, or are moving volume to other partners, and the finance, logistics and EDI staff who support them.

Scope: This guide describes typical practice for this kind of trading relationship and helps read and reconcile Shiloh Industries documents held from before it ceased operating.

Shiloh Industries sold its assets after a 2020 bankruptcy. Shiloh Industries filed for Chapter 11 in August 2020 and sold substantially all of its assets to an affiliate of MiddleGround Capital. This guide is for teams that still hold Shiloh documents, parts orders or invoices.

This guide describes how Shiloh Industries documents were typically exchanged, so you can reconcile, archive and migrate them. It does not include Shiloh Industries' specification and no Shiloh Industries document was read for it.

Start with what you still hold: open invoices, credits and claims, maps and partner profiles that are still scheduled, and the historical documents that finance or audit may ask for. Then plan the replacement partners, because no new volume can go to Shiloh Industries.

ECOM can map and archive the historical documents, match open items in your ERP and warehouse systems, and connect the partners that replace Shiloh Industries, as software, as a managed service or both.

Business scenarios

Where Shiloh Industries integration gets complicated

Typical requirements—confirm with your trading partner.

Open invoices, credits and deductions

Invoices, credits and deductions tied to Shiloh Industries can still be open. Matching them to the original orders and shipments decides what is owed or recoverable.

How ECOM helps: ECOM maps the historical 810 and 850 records to your ERP or archive and matches open items to the original orders, tenders or shipments, so open balances and claims can be reviewed.

What you gain: A clear record of what is open and what is settled.

Moving the program to other partners

Volume that went through Shiloh Industries needs other customers or channels, with the same item, order and invoice data mapped to their formats.

How ECOM helps: ECOM connects the replacement partners, maps the same internal data to their formats and runs the test cycles with you, so volume can move in stages.

What you gain: Volume moves to current partners without a gap in documents.

Historical order records

Past Shiloh Industries orders, ship notices and invoices may be needed for audit, claims or sales analysis.

How ECOM helps: ECOM can map and archive the historical documents with their transfer history, so they stay searchable for audit, claims and tax review.

What you gain: Records are available when a claim, audit or dispute needs them.

Retiring the old connection

Maps, schedules and partner profiles for Shiloh Industries should be removed so nothing is sent to a connection that no longer exists.

How ECOM helps: ECOM reviews which maps, schedules and partner profiles still point to the former partner and retires them with you.

What you gain: No document is sent to a connection that no longer exists, and the partner list stays clean.

Workflows

Typical Shiloh Industries business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Shiloh Industries' published process.

Reconcile open items

  1. 1Gather the 810, 850, 856 history
  2. 2Match each to its source document
  3. 3Settle or dispute open items
  4. 4Archive history and transfer log

Move volume to current partners

  1. 1Choose the replacement partners
  2. 2Map your data to their formats
  3. 3Test and run in parallel
  4. 4Retire the old maps and profile

Documents and APIs

Shiloh Industries documents by program

General guidance. We could not verify Shiloh Industries' EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Shiloh Industries' confirmed requirements. Confirm the list, versions and programs with Shiloh Industries.

DocumentNameDirectionProgramStatusPurpose
830 Planning Schedule with Release Capability From Shiloh Industries Not stated General guidance Typically gives forecasts and planned requirements by item and date.
862 Shipping Schedule From Shiloh Industries Not stated General guidance Typically gives firm shipping requirements, alone or alongside the planning schedule.
856 Ship Notice/Manifest To Shiloh Industries Not stated General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice To Shiloh Industries Not stated General guidance Typically bills for what shipped, matched against the order.
850 Purchase Order From Shiloh Industries Not stated General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment To Shiloh Industries Not stated General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • Historical connection (not for new setups)

    Shiloh Industries documents were typically exchanged over AS2, SFTP or a value-added network. Do not build a new connection to Shiloh Industries; use this only to read historical files.

    General guidance

  • Replacement partners

    Plan the connections to the partners that take over the volume: each new partner sets its own method, identifiers and test cycles.

    General guidance

  • Archive and retrieval

    Keep the historical documents and their transfer history where finance and audit can retrieve them, in your ERP or an archive.

    General guidance

Challenges

Common integration challenges

  • Open balances and claims

    Invoices, credits, claims and refunds tied to Shiloh Industries may still be open, and the people who handled them may have moved on.

  • Schedules that still point to it

    Maps, schedules and partner profiles for Shiloh Industries may still exist in your systems and keep producing documents nobody will receive.

  • Records for audit and claims

    Past Shiloh Industries documents may be needed for audit, tax or claims, so they need to stay searchable with their transfer history.

  • No current specification

    Shiloh Industries no longer supports new connections, so no new connection can be set up. Plan the replacement partners instead.

Automation options for Shiloh Industries suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet Shiloh Industries' labeling and ship notice requirements, and see what needs action. Shiloh Industries sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Legacy EDI flow

How Shiloh Industries documents were exchanged

This is the sequence these documents typically followed. Use it to read and reconcile historical files, not to set up a new connection to Shiloh Industries.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with Shiloh Industries.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From Shiloh Industries to you

    Typically gives forecasts and planned requirements by item and date.

  2. 862 Shipping Schedule

    From Shiloh Industries to you

    Typically gives firm shipping requirements, alone or alongside the planning schedule.

  3. 856 Ship Notice/Manifest

    From you to Shiloh Industries

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to Shiloh Industries

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Purchase-order program

  1. 850 Purchase Order

    From Shiloh Industries to you

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  2. 855 Purchase Order Acknowledgment

    From you to Shiloh Industries

    Typically confirms an order, or reports changes to quantities, prices or dates.

  3. 856 Ship Notice/Manifest

    From you to Shiloh Industries

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to Shiloh Industries

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the legacy documents?

Tell ECOM what you still hold and where the volume is moving. A specialist will outline how to reconcile, archive and migrate. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Shiloh Industries migration

Each request goes to an ECOM EDI specialist with Shiloh Industries' name attached, so the reply starts from your program.

  • Review what you still hold

    Tell us which Shiloh Industries documents, open items and schedules remain; we explain how to reconcile and archive them.

    Request a legacy review
  • Connect Shiloh Industries to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Migrate to current partners

    Map the same internal data to the partners that replace Shiloh Industries, test them and retire the old connection.

    Plan the migration
  • Shipping labels and ASNs

    Labels and ship notices that match Shiloh Industries' rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

Shiloh Industries integration FAQs

Can I still connect to Shiloh Industries by EDI?

No. Shiloh Industries sold its assets after a 2020 bankruptcy, so no new connection can be set up. Use this guide to reconcile and archive what you hold, and to connect the partners that replace it.

What should I do with open Shiloh Industries invoices, claims and deductions?

Match each open item to its original order, tender or shipment, then settle or dispute it with finance. ECOM can map the historical documents to your ERP and warehouse systems so open items can be reviewed.

Which EDI documents were typical for an automotive supplier?

Typical documents were 830, 862, 856, 810, 850, 855, 997. That is general practice, not Shiloh Industries' published list.

How can ECOM help me move from Shiloh Industries?

ECOM maps your internal data to the replacement partners' formats, runs the test cycles with you and retires the old maps and partner profile, as software, as a managed service or both.

Does this guide mean Shiloh Industries endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Shiloh Industries.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Shiloh Industries sets its own requirements and can change them at any time; your Shiloh Industries implementation guide, supplier portal or account contact is the authoritative source for your program.

Request help with your Shiloh Industries migration

Tell us which Shiloh Industries documents and open items you still hold, which ERP you run and where the volume is moving. We will outline how to reconcile, archive and migrate.