Carriers integration

Union Pacific EDI 404, 417 and 410 integration

Union Pacific takes your 404 shipping instructions, passes waybills through Railinc as 417s and bills with 410s. See the rail document flow, the 8050 upgrade and how ECOM helps.

At a glance

Union Pacific Railroad integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Union Pacific Railroad program or a customer relationship.

Illustration of a locomotive pulling freight cars, representing the carriers industry that Union Pacific Railroad operates in.
Industry. Carriers: where Union Pacific Railroad operates.
Workflow diagram: your TMS, ERP and finance systems exchange documents with Union Pacific Railroad through ECOM. You send 404; you receive 410; 997 acknowledgments go both ways. Your systems TMS · ERP · finance ECOM integration map · validate · connect · monitor Union Pacific Railroad 404 404 410 410 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Tenders and invoices re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Union Pacific Railroad

Tell us which documents you exchange with Union Pacific Railroad, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Union Pacific Railroad.

  • Review of Union Pacific Railroad's requirements with you, once you have them
  • EDI and API integration with your TMS, ERP and finance systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Union Pacific Railroad

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Union Pacific Railroad integration fits your systems

Your systemsTMS, ERP and accounting
ECOMMapping, validation, connectivity and monitoringValue-added network (VAN) · Specialist EDI provider
Union Pacific RailroadIts program, documents and requirements
  1. ConfirmConfirm your Union Pacific Railroad program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Union Pacific Railroad integration

Who this is for: Shippers, intermodal marketing companies and logistics providers that ship by rail with Union Pacific, and the transportation and finance teams that tender shipments and pay freight invoices.

Scope: Union Pacific's public pages do not describe EDI testing or onboarding steps, or name other documents such as 322 or 214. Those are not shown as Union Pacific documents.

A shipment with Union Pacific starts with your 404, the shipping instruction (bill of lading) that you create in EDI software and send to the first road-haul railroad in the routing. Union Pacific returns an acknowledgment, and the first road haul then passes the shipment to the other carriers in the routing. The waybill moves as a 417: it is sent to Railinc's Forward and Store system, which forwards it to the other road-haul carriers on the route. Freight invoices are handled as 410s through Union Pacific's e-invoicing contact.

Union Pacific has changed requirements recently. Customer notice CN2025-1 (January 27, 2025) moved its inter-carrier requirements from version 8030 to 8050, effective February 11, 2025, aligned with Railinc's Forward and Store upgrade. The 417s Union Pacific sends carry version 8050, and loaded bills of lading (404s) must now include a weight in the N7 segment. Customers who tender 404s are not required to upgrade their version, but the weight requirement applies during validation. The page also expects rail trading partners to use one of the two most current versions, and says Rail Industry EDI Implementation guidelines are ordered from Washington Publishing Company. It describes a value-added network option and mentions specialist EDI providers for help.

ECOM maps your 404 and 410 data to your TMS, ERP and payables systems, adds the weight and identifier checks before sending, tests and monitors every file after go-live, as software, as a managed service or both.

Business scenarios

Where Union Pacific Railroad integration gets complicated

Typical requirements—confirm with your trading partner.

Missing weight on a loaded 404

Union Pacific now applies a weight requirement in the N7 segment of loaded bills of lading during validation.

How ECOM helps: ECOM checks the weight and the other required fields on every 404 before it is sent.

What you gain: Fewer rejected tenders and less manual correction.

Routing across railroads

The first road haul receives your 404, and the 417 waybill is forwarded to the other carriers through Railinc, so errors travel with the shipment.

How ECOM helps: ECOM validates references and monitors acknowledgments so problems are found at the start of the move.

What you gain: Shipments reach the connecting railroads with correct data.

Workflows

Typical Union Pacific Railroad business workflows

The steps summarize the documents below. Where a step is not in Union Pacific Railroad's published documents, it reflects common practice.

Tender to waybill

  1. 1Send 404 shipping instructions
  2. 2Receive acknowledgment
  3. 3Railinc forwards the 417
  4. 4Track the move

Freight invoice

  1. 1Receive 410 freight invoice
  2. 2Match to the 404
  3. 3Check charges
  4. 4Approve or dispute

Documents and APIs

Union Pacific Railroad documents by program

Every document this guide names, with the program it applies to and its status. Required, optional and conditional come from Union Pacific Railroad's published documents cited below; documents marked general guidance are common in this industry but not confirmed for Union Pacific Railroad.

DocumentNameDirectionProgramStatusPurpose
404 Rail Carrier Shipment Information To Union Pacific Railroad Union Pacific EDI for customers Named; level not stated Union Pacific describes the 404 as the shipping instructions (bill of lading) the customer creates in EDI software and sends to the first road-haul railroad in the routing.
410 Rail Carrier Freight Details and Invoice From Union Pacific Railroad Union Pacific EDI for customers Named; level not stated Union Pacific lists the 410 for freight invoices and gives a separate e-invoicing contact for them. Its page does not say more about the document.
997 Functional Acknowledgment Both directions Not stated General guidance Commonly used to confirm that each file was received and could be read. Union Pacific does not list it on its EDI page.

Connectivity

How companies connect

  • Value-added network (VAN)

    Union Pacific describes a VAN option in which messages go to a VAN mailbox instead of a direct connection.

    From Union Pacific Railroad's published documents

  • Specialist EDI provider

    Union Pacific suggests working with a specialized EDI provider for consultation or services.

    From Union Pacific Railroad's published documents

Challenges

Common integration challenges

  • Version and weight requirements

    Union Pacific moved inter-carrier requirements to version 8050 on February 11, 2025, and loaded 404s need an N7 weight. Confirm what your maps produce.

  • Two most current versions

    Rail trading partners are expected to use one of the two most current versions, and Union Pacific upgrades most EDI messaging about every two years.

  • Waybill passes through Railinc

    The 417 is forwarded by Railinc to other carriers, so data you send on the 404 must be correct for the whole route.

  • Freight invoice matching

    Each 410 must tie back to the 404 shipment so charges can be audited before payment.

Automation options for Union Pacific Railroad shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. Union Pacific Railroad sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

General EDI flow

How EDI with Union Pacific Railroad typically works

The documents, their order and the timing are Union Pacific Railroad's to set; this is the general sequence most programs of this kind follow.

  1. 404 Rail Carrier Shipment Information

    From you to Union Pacific Railroad

    Union Pacific describes the 404 as the shipping instructions (bill of lading) the customer creates in EDI software and sends to the first road-haul railroad in the routing.

  2. 410 Rail Carrier Freight Details and Invoice

    From Union Pacific Railroad to you

    Union Pacific lists the 410 for freight invoices and gives a separate e-invoicing contact for them. Its page does not say more about the document.

  3. 997 Functional Acknowledgment

    Both directions

    Commonly used to confirm that each file was received and could be read. Union Pacific does not list it on its EDI page.

Working from Union Pacific Railroad's published specification?

Tell ECOM which program and documents apply to you. We read the published specification with you, map it to your systems and test against it. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Union Pacific Railroad program

Each request goes to an ECOM EDI specialist with Union Pacific Railroad's name attached, so the reply starts from your program.

  • Review Union Pacific Railroad's requirements

    Send us Union Pacific Railroad's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Union Pacific Railroad to your ERP

    Tenders, status and freight invoices in and out of the TMS, ERP and finance systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Union Pacific Railroad document, then go live with monitoring from the first file.

    Plan testing and certification

Union Pacific Railroad integration FAQs

Which EDI documents does Union Pacific describe for customers?

Union Pacific describes the 404 shipping instructions, the 417 waybill that moves through Railinc's Forward and Store system, and the 410 freight invoice.

What changed on February 11, 2025?

Union Pacific upgraded inter-carrier requirements from version 8030 to 8050. The 417s it sends carry version 8050, and loaded 404s must include a weight in the N7 segment.

Do I have to upgrade my 404 version?

Union Pacific says customers who tender 404s are not required to upgrade their EDI version, but the weight requirement is applied during validation.

Where do I get the implementation guidelines?

Union Pacific says Rail Industry EDI Implementation guidelines are ordered from Washington Publishing Company.

Is this page an endorsement by Union Pacific?

This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Union Pacific.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Union Pacific Railroad sets its own requirements and can change them at any time; your Union Pacific Railroad implementation guide, supplier portal or account contact is the authoritative source for your program.

Request Union Pacific Railroad integration assistance

Tell us about your Union Pacific Railroad program, documents and ERP. We will outline the connection, mapping and testing plan.