Manufacturing integration

Roche EDI integration

How EDI and API integration with Roche typically works: pharmaceutical manufacturing documents, workflows, onboarding and common problems, as typical practice to confirm with Roche.

Related listing: ECOM's directory lists this name and Roche / Genentech as related entries. Use the Roche / Genentech guide for the full integration guide; confirm with your trading partner which name and entity your documents use.

At a glance

Roche integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Roche program or a customer relationship.

Illustration of a factory with a conveyor carrying boxes, representing the manufacturing industry that Roche operates in.
Industry. Manufacturing: where Roche operates.
Workflow diagram: your ERP and warehouse systems exchange documents with Roche through ECOM. You send 856, 810, 855, 850; you receive 830, 862, 850, 860; 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor Roche 856 810 855 850 856 810 855 850 830 862 850 860 830 862 850 860 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Roche

Tell us which documents you exchange with Roche, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Roche.

  • Review of Roche's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Roche

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Roche integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Portal or API · Serialization data exchange
RocheIts program, documents and requirements
  1. ConfirmConfirm your Roche program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Roche integration

Who this is for: Component, material and logistics suppliers that supply Roche, and the distributors and dealers that buy its products.

Scope: This guide describes typical practice for this kind of trading relationship; Roche's own program details are confirmed during onboarding.

Roche manufactures industrial or equipment manufacturer. Industrial manufacturers rely on supplier schedules for materials and components, and sell through distributors, dealers and direct customers.

Programs run by an industrial or equipment manufacturer tend to grow rules over time, so a setup that is easy to change and monitor is worth more than a one-time build. Roche's own EDI or API specification is not part of this guide and no Roche document was read: treat what follows as typical practice for an industrial or equipment manufacturer, and confirm the documents, X12 version, delivery method and testing steps with Roche.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Roche integration gets complicated

Typical requirements—confirm with your trading partner.

Planning schedules

Forecasts and releases change as demand changes. Suppliers need to react without losing sight of what is in transit.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes Roche has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Configured and engineered products

Configured orders carry detail that must survive each document and system.

How ECOM helps: ECOM maps item, price and pack data between your systems and Roche's format and validates it before it is sent, so mismatches are caught on your side.

What you gain: Fewer rejections caused by data that does not match what Roche has on file.

Dealer and distributor channel

Dealers and distributors send orders and expect acknowledgments, ship notices and invoices.

How ECOM helps: ECOM maps invoice, payment and remittance data to your ERP or finance system and matches each document to the order or shipment it relates to, with differences listed for review.

What you gain: Faster reconciliation and cash application, and a clear trail for audit.

New plant or ship-to location

Adding a plant or warehouse means new ship-to data and rules across every document.

How ECOM helps: ECOM runs onboarding as a project: we confirm Roche's requirements with you, map the documents, build the connection and run test cycles until Roche accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Workflows

Typical Roche business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Roche's published process.

Supply side

  1. 1Receive 830 or 850
  2. 2Confirm supply
  3. 3Ship and send 856
  4. 4Send 810 invoice

Sales side

  1. 1Place 850 order
  2. 2Receive 855 and 856
  3. 3Receive goods and 810
  4. 4Reconcile and pay

Documents and APIs

Roche documents by program

General guidance. We could not verify Roche's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Roche's confirmed requirements. Confirm the list, versions and programs with Roche.

DocumentNameDirectionProgramStatusPurpose
830 Planning Schedule with Release Capability From Roche If you supply Roche General guidance Typically gives forecasts and planned requirements by item and date.
862 Shipping Schedule From Roche If you supply Roche General guidance Typically gives firm shipping requirements, alone or alongside the planning schedule.
856 Ship Notice/Manifest To Roche If you supply Roche General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice To Roche If you supply Roche General guidance Typically bills for what shipped, matched against the order.
850 Purchase Order From Roche If you supply Roche General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment To Roche If you supply Roche General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
860 Purchase Order Change Request - Buyer Initiated From Roche If you supply Roche General guidance Typically changes an order that is already placed.
997 Functional Acknowledgment Both directions If you supply Roche General guidance Typically confirms that each file was received and could be read.
850 Purchase Order To Roche If you buy from Roche General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment From Roche If you buy from Roche General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
856 Ship Notice/Manifest From Roche If you buy from Roche General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice From Roche If you buy from Roche General guidance Typically bills for what shipped, matched against the order.
846 Inventory Inquiry/Advice From Roche If you buy from Roche General guidance Typically shares inventory positions or availability between the two sides.
860 Purchase Order Change Request - Buyer Initiated To Roche If you buy from Roche General guidance Typically changes an order that is already placed.
865 Purchase Order Change Acknowledgment/Request - Seller Initiated From Roche If you buy from Roche General guidance Typically answers an order change with an accepted, changed or rejected response.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Manufacturers and wholesalers commonly exchange EDI over AS2, SFTP or a value-added network.

    General guidance

  • Portal or API

    Some manufacturers also provide trade portals or APIs for orders, inventory and chargebacks.

    General guidance

  • Serialization data exchange

    Product serialization data is exchanged under DSCSA rules alongside ordering documents.

    General guidance

Challenges

Common integration challenges

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Roche. ECOM works from them during mapping and testing.

  • Order detail

    Configured items need accurate detail in every document.

  • Schedule changes

    Frequent changes need fast handling. Details depend on your agreement with Roche.

Automation options for Roche suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet Roche's labeling and ship notice requirements, and see what needs action. Roche sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect Roche documents to your ERP

ECOM connects the documents you exchange with Roche to your ERP and warehouse systems, so orders post without re-keying and ship notices and invoices come from the data you already hold.

Industry

Industrial Manufacturing

See how ECOM supports supplier schedules, shipping and invoicing for manufacturers.

Solution

ERP Integration

Connect the documents you exchange with Roche to your ERP without re-keying.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with Roche typically works

The documents, their order and the timing are Roche's to set; this is the general sequence most programs of this kind follow.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with Roche.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From Roche to you

    Typically gives forecasts and planned requirements by item and date.

  2. 862 Shipping Schedule

    From Roche to you

    Typically gives firm shipping requirements, alone or alongside the planning schedule.

  3. 856 Ship Notice/Manifest

    From you to Roche

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to Roche

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

  6. 856 Ship Notice/Manifest

    From Roche to you

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  7. 810 Invoice

    From Roche to you

    Typically bills for what shipped, matched against the order.

  8. 846 Inventory Inquiry/Advice

    From Roche to you

    Typically shares inventory positions or availability between the two sides.

Purchase-order program

  1. 850 Purchase Order

    From Roche to you

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  2. 855 Purchase Order Acknowledgment

    From you to Roche

    Typically confirms an order, or reports changes to quantities, prices or dates.

  3. 860 Purchase Order Change Request - Buyer Initiated

    From Roche to you

    Typically changes an order that is already placed.

  4. 850 Purchase Order

    From you to Roche

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  5. 855 Purchase Order Acknowledgment

    From Roche to you

    Typically confirms an order, or reports changes to quantities, prices or dates.

  6. 860 Purchase Order Change Request - Buyer Initiated

    From you to Roche

    Typically changes an order that is already placed.

  7. 865 Purchase Order Change Acknowledgment/Request - Seller Initiated

    From Roche to you

    Typically answers an order change with an accepted, changed or rejected response.

  8. 856 Ship Notice/Manifest

    From you to Roche

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  9. 810 Invoice

    From you to Roche

    Typically bills for what shipped, matched against the order.

  10. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

  11. 856 Ship Notice/Manifest

    From Roche to you

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  12. 810 Invoice

    From Roche to you

    Typically bills for what shipped, matched against the order.

  13. 846 Inventory Inquiry/Advice

    From Roche to you

    Typically shares inventory positions or availability between the two sides.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Roche program

Each request goes to an ECOM EDI specialist with Roche's name attached, so the reply starts from your program.

  • Review Roche's requirements

    Send us Roche's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Roche to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Roche document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match Roche's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

Roche integration FAQs

How does onboarding with Roche usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Roche's requirements, test cycles and your ERP.

Does this guide mean Roche endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Roche.

Does Roche use EDI?

Industrial manufacturers commonly use EDI with suppliers and customers. This page does not include Roche's requirements; confirm which documents apply to your relationship with Roche.

Are you supplying Roche or buying from it?

The documents differ. Suppliers usually receive schedules or orders; buyers usually send orders and receive acknowledgments, ship notices and invoices.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Roche sets its own requirements and can change them at any time; your Roche implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • Roche: no company document read Background, not checked against a company source No Roche supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request Roche integration assistance

Tell us about your Roche program, documents and ERP. We will outline the connection, mapping and testing plan.