Manufacturing integration

Stanley Black & Decker EDI integration

How EDI and API integration with Stanley Black & Decker typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with Stanley Black & Decker.

At a glance

Stanley Black & Decker integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Stanley Black & Decker program or a customer relationship.

Illustration of a factory with a conveyor carrying boxes, representing the manufacturing industry that Stanley Black & Decker operates in.
Industry. Manufacturing: where Stanley Black & Decker operates.
Workflow diagram: your ERP and warehouse systems exchange documents with Stanley Black & Decker through ECOM. You send 856, 810, 855, 850; you receive 830, 862, 850, 860; 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor Stanley Black & Decker 856 810 855 850 856 810 855 850 830 862 850 860 830 862 850 860 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Stanley Black & Decker

Tell us which documents you exchange with Stanley Black & Decker, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Stanley Black & Decker.

  • Review of Stanley Black & Decker's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Stanley Black & Decker

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Stanley Black & Decker integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2 or SFTP · EDI network (VAN) · API or web portal
Stanley Black & DeckerIts program, documents and requirements
  1. ConfirmConfirm your Stanley Black & Decker program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Stanley Black & Decker integration

Who this is for: Component, material and logistics suppliers that supply Stanley Black & Decker, and the distributors and dealers that buy its products.

Scope: This guide describes typical practice for this kind of trading relationship; Stanley Black & Decker's own program details are confirmed during onboarding.

Stanley Black & Decker makes tools, outdoor equipment and industrial products. ECOM's directory lists it under tools. Industrial manufacturers rely on supplier schedules for materials and components, and sell through distributors, dealers and direct customers.

Most integration problems with an industrial or equipment manufacturer come from mismatched item data and late changes, not from the file format itself. Stanley Black & Decker's own EDI or API specification is not part of this guide and no Stanley Black & Decker document was read: treat what follows as typical practice for an industrial or equipment manufacturer, and confirm the documents, X12 version, delivery method and testing steps with Stanley Black & Decker.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Stanley Black & Decker integration gets complicated

Typical requirements—confirm with your trading partner.

Configured and engineered products

Configured orders carry detail that must survive each document and system.

How ECOM helps: ECOM maps item, price and pack data between your systems and Stanley Black & Decker's format and validates it before it is sent, so mismatches are caught on your side.

What you gain: Fewer rejections caused by data that does not match what Stanley Black & Decker has on file.

Large catalogs and special orders

Tens of thousands of items, frequent price changes and a mix of stocked and special-order lines make catalog accuracy a daily task for hardware and home improvement suppliers.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes Stanley Black & Decker has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Dealer and distributor channel

Dealers and distributors send orders and expect acknowledgments, ship notices and invoices.

How ECOM helps: ECOM maps invoice, payment and remittance data to your ERP or finance system and matches each document to the order or shipment it relates to, with differences listed for review.

What you gain: Faster reconciliation and cash application, and a clear trail for audit.

New plant or ship-to location

Adding a plant or warehouse means new ship-to data and rules across every document.

How ECOM helps: ECOM runs onboarding as a project: we confirm Stanley Black & Decker's requirements with you, map the documents, build the connection and run test cycles until Stanley Black & Decker accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Workflows

Typical Stanley Black & Decker business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Stanley Black & Decker's published process.

Supply side

  1. 1Receive 830 or 850
  2. 2Confirm supply
  3. 3Ship and send 856
  4. 4Send 810 invoice

Sales side

  1. 1Place 850 order
  2. 2Receive 855 and 856
  3. 3Receive goods and 810
  4. 4Reconcile and pay

Documents and APIs

Stanley Black & Decker documents by program

General guidance. We could not verify Stanley Black & Decker's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Stanley Black & Decker's confirmed requirements. Confirm the list, versions and programs with Stanley Black & Decker.

DocumentNameDirectionProgramStatusPurpose
830 Planning Schedule with Release Capability From Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically gives forecasts and planned requirements by item and date.
862 Shipping Schedule From Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically gives firm shipping requirements, alone or alongside the planning schedule.
856 Ship Notice/Manifest To Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice To Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically bills for what shipped, matched against the order.
850 Purchase Order From Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment To Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
860 Purchase Order Change Request - Buyer Initiated From Stanley Black & Decker If you supply Stanley Black & Decker General guidance Typically changes an order that is already placed.
997 Functional Acknowledgment Both directions If you supply Stanley Black & Decker General guidance Typically confirms that each file was received and could be read.
850 Purchase Order To Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment From Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
856 Ship Notice/Manifest From Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice From Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically bills for what shipped, matched against the order.
846 Inventory Inquiry/Advice From Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically shares inventory positions or availability between the two sides.
860 Purchase Order Change Request - Buyer Initiated To Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically changes an order that is already placed.
865 Purchase Order Change Acknowledgment/Request - Seller Initiated From Stanley Black & Decker If you buy from Stanley Black & Decker General guidance Typically answers an order change with an accepted, changed or rejected response.

Connectivity

How companies connect

  • AS2 or SFTP

    Many companies exchange EDI files directly over AS2 or SFTP.

    General guidance

  • EDI network (VAN)

    Many suppliers connect through a value-added network that delivers files to and from the partner and keeps an audit trail.

    General guidance

  • API or web portal

    Some programs use REST or SOAP APIs, a supplier portal or a cloud EDI service for some documents. A login is usually required for portals.

    General guidance

Challenges

Common integration challenges

  • Order detail

    Configured items need accurate detail in every document.

  • Schedule changes

    Frequent changes need fast handling. Details depend on your agreement with Stanley Black & Decker.

  • Lead times

    Long lead times need updated dates. Ask Stanley Black & Decker how this applies to your program.

  • Invoice matching

    Invoices must match orders and receipts.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Stanley Black & Decker. ECOM works from them during mapping and testing.

Automation options for Stanley Black & Decker suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet Stanley Black & Decker's labeling and ship notice requirements, and see what needs action. Stanley Black & Decker sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect Stanley Black & Decker documents to your ERP

ECOM connects the documents you exchange with Stanley Black & Decker to your ERP and warehouse systems, so orders post without re-keying and ship notices and invoices come from the data you already hold.

Industry

Industrial Manufacturing

See how ECOM supports supplier schedules, shipping and invoicing for manufacturers.

Solution

ERP Integration

Connect the documents you exchange with Stanley Black & Decker to your ERP without re-keying.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with Stanley Black & Decker typically works

The documents, their order and the timing are Stanley Black & Decker's to set; this is the general sequence most programs of this kind follow.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with Stanley Black & Decker.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From Stanley Black & Decker to you

    Typically gives forecasts and planned requirements by item and date.

  2. 862 Shipping Schedule

    From Stanley Black & Decker to you

    Typically gives firm shipping requirements, alone or alongside the planning schedule.

  3. 856 Ship Notice/Manifest

    From you to Stanley Black & Decker

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to Stanley Black & Decker

    Typically bills for what shipped, matched against the order.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

  6. 856 Ship Notice/Manifest

    From Stanley Black & Decker to you

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  7. 810 Invoice

    From Stanley Black & Decker to you

    Typically bills for what shipped, matched against the order.

  8. 846 Inventory Inquiry/Advice

    From Stanley Black & Decker to you

    Typically shares inventory positions or availability between the two sides.

Purchase-order program

  1. 850 Purchase Order

    From Stanley Black & Decker to you

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  2. 855 Purchase Order Acknowledgment

    From you to Stanley Black & Decker

    Typically confirms an order, or reports changes to quantities, prices or dates.

  3. 860 Purchase Order Change Request - Buyer Initiated

    From Stanley Black & Decker to you

    Typically changes an order that is already placed.

  4. 850 Purchase Order

    From you to Stanley Black & Decker

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  5. 855 Purchase Order Acknowledgment

    From Stanley Black & Decker to you

    Typically confirms an order, or reports changes to quantities, prices or dates.

  6. 860 Purchase Order Change Request - Buyer Initiated

    From you to Stanley Black & Decker

    Typically changes an order that is already placed.

  7. 865 Purchase Order Change Acknowledgment/Request - Seller Initiated

    From Stanley Black & Decker to you

    Typically answers an order change with an accepted, changed or rejected response.

  8. 856 Ship Notice/Manifest

    From you to Stanley Black & Decker

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  9. 810 Invoice

    From you to Stanley Black & Decker

    Typically bills for what shipped, matched against the order.

  10. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

  11. 856 Ship Notice/Manifest

    From Stanley Black & Decker to you

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  12. 810 Invoice

    From Stanley Black & Decker to you

    Typically bills for what shipped, matched against the order.

  13. 846 Inventory Inquiry/Advice

    From Stanley Black & Decker to you

    Typically shares inventory positions or availability between the two sides.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Stanley Black & Decker program

Each request goes to an ECOM EDI specialist with Stanley Black & Decker's name attached, so the reply starts from your program.

  • Review Stanley Black & Decker's requirements

    Send us Stanley Black & Decker's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Stanley Black & Decker to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Stanley Black & Decker document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match Stanley Black & Decker's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

Stanley Black & Decker integration FAQs

Does Stanley Black & Decker use EDI?

Industrial manufacturers commonly use EDI with suppliers and customers. This page does not include Stanley Black & Decker's requirements.

Are you supplying Stanley Black & Decker or buying from it?

The documents differ. Suppliers usually receive schedules or orders; buyers usually send orders and receive acknowledgments, ship notices and invoices.

Which EDI documents are typical for an industrial or equipment manufacturer?

Typical documents are 830, 862, 856, 810, 850, 855, 860, 997, 846, 865. That is general practice, not Stanley Black & Decker's published list.

How does onboarding with Stanley Black & Decker usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Stanley Black & Decker's requirements, test cycles and your ERP.

Does this guide mean Stanley Black & Decker endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Stanley Black & Decker.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Stanley Black & Decker sets its own requirements and can change them at any time; your Stanley Black & Decker implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • Stanley Black & Decker: company description Background, not checked against a company source The one-sentence description of Stanley Black & Decker comes from general public knowledge and was not checked against Stanley Black & Decker's own website for this page.
  • Stanley Black & Decker: no company document read Background, not checked against a company source No Stanley Black & Decker supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request Stanley Black & Decker integration assistance

Tell us about your Stanley Black & Decker program, documents and ERP. We will outline the connection, mapping and testing plan.