Telecom and Media integration

Orange EDI integration

How EDI and API integration with Orange typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with Orange.

At a glance

Orange integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Orange program or a customer relationship.

Illustration of a cell tower with signal waves and a screen, representing the telecom and media industry that Orange operates in. M150 40a40 40 0 0 1 0 0
Industry. Telecom and Media: where Orange operates.
Workflow diagram: your ERP and warehouse systems exchange documents with Orange through ECOM. You send 855, 856, 810, 846; you receive 850, 860; 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor Orange 855 856 810 846 855 856 810 846 850 860 850 860 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Orange

Tell us which documents you exchange with Orange, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Orange.

  • Review of Orange's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Orange

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Orange integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2 or SFTP · EDI network (VAN) · API or web portal
OrangeIts program, documents and requirements
  1. ConfirmConfirm your Orange program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Orange integration

Who this is for: Device makers, equipment suppliers and service providers that supply Orange, and their order and finance teams.

Scope: This guide describes typical practice for this kind of trading relationship; Orange's own program details are confirmed during onboarding.

Orange is an international telecommunications company. ECOM's directory lists it under international telecom. Suppliers of devices, network equipment and services typically deal with purchase orders, ship notices and invoices, with serial number and project references.

Most integration problems with a telecommunications provider come from mismatched item data and late changes, not from the file format itself. Orange's own EDI or API specification is not part of this guide and no Orange document was read: treat what follows as typical practice for a telecommunications provider, and confirm the documents, X12 version, delivery method and testing steps with Orange.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Orange integration gets complicated

Typical requirements—confirm with your trading partner.

Device and equipment shipments

Shipments of devices and equipment often need serial numbers or identifiers on the ship notice.

How ECOM helps: ECOM builds the ship notice from your shipment data, checks it against the order and the label data before it is sent, and flags differences you can fix before the load leaves.

What you gain: Fewer receiving problems and compliance deductions caused by notices that do not match the load.

Devices, equipment and projects

Telecom buyers order devices and network equipment, often with serial numbers and project or site references that must flow into invoices.

How ECOM helps: ECOM maps invoice, payment and remittance data to your ERP or finance system and matches each document to the order or shipment it relates to, with differences listed for review.

What you gain: Faster reconciliation and cash application, and a clear trail for audit.

Launch-driven volume

Product launches create short, large demand peaks.

How ECOM helps: ECOM runs onboarding as a project: we confirm Orange's requirements with you, map the documents, build the connection and run test cycles until Orange accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Returns and refurbishment

Returned devices need receipt and credit documents.

How ECOM helps: ECOM monitors each document and acknowledgment, flags rejected, late or mismatched ones and routes each exception to a named owner with the document history attached.

What you gain: Problems are corrected before they turn into deductions, write-offs or delayed payment.

Workflows

Typical Orange business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Orange's published process.

Order to cash

  1. 1Receive 850 purchase order
  2. 2Send 855 acknowledgment
  3. 3Ship and send 856
  4. 4Send 810 invoice

Order change

  1. 1Receive 860 change
  2. 2Review the change
  3. 3Confirm the update
  4. 4Ship and invoice

Documents and APIs

Orange documents by program

General guidance. We could not verify Orange's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Orange's confirmed requirements. Confirm the list, versions and programs with Orange.

DocumentNameDirectionProgramStatusPurpose
850 Purchase Order From Orange Not stated General guidance Typically carries the order: items, quantities, prices, ship-to locations and requested dates.
855 Purchase Order Acknowledgment To Orange Not stated General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
856 Ship Notice/Manifest To Orange Not stated General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice To Orange Not stated General guidance Typically bills for what shipped, matched against the order.
846 Inventory Inquiry/Advice To Orange Not stated General guidance Typically shares inventory positions or availability between the two sides.
860 Purchase Order Change Request - Buyer Initiated From Orange Not stated General guidance Typically changes an order that is already placed.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2 or SFTP

    Many companies exchange EDI files directly over AS2 or SFTP.

    General guidance

  • EDI network (VAN)

    Many suppliers connect through a value-added network that delivers files to and from the partner and keeps an audit trail.

    General guidance

  • API or web portal

    Some programs use REST or SOAP APIs, a supplier portal or a cloud EDI service for some documents. A login is usually required for portals.

    General guidance

Challenges

Common integration challenges

  • Serial and identifier data

    Ship notices must carry the identifiers receivers expect.

  • Project references

    Project and site codes must match across documents.

  • Launch peaks

    Peaks stress manual processes. Ask Orange how this applies to your program.

  • Invoice matching

    Invoices must match orders and receipts.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Orange. ECOM works from them during mapping and testing.

Automation options for Orange suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet Orange's labeling and ship notice requirements, and see what needs action. Orange sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect Orange documents to your ERP

ECOM connects the documents you exchange with Orange to your ERP and warehouse systems, so orders post without re-keying and ship notices and invoices come from the data you already hold.

Industry

Telecom and Media

See how ECOM supports telecom and media suppliers and vendors.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with Orange typically works

The documents, their order and the timing are Orange's to set; this is the general sequence most programs of this kind follow.

  1. 850 Purchase Order

    From Orange to you

    Typically carries the order: items, quantities, prices, ship-to locations and requested dates.

  2. 855 Purchase Order Acknowledgment

    From you to Orange

    Typically confirms an order, or reports changes to quantities, prices or dates.

  3. 856 Ship Notice/Manifest

    From you to Orange

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to Orange

    Typically bills for what shipped, matched against the order.

  5. 846 Inventory Inquiry/Advice

    From you to Orange

    Typically shares inventory positions or availability between the two sides.

  6. 860 Purchase Order Change Request - Buyer Initiated

    From Orange to you

    Typically changes an order that is already placed.

  7. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Orange program

Each request goes to an ECOM EDI specialist with Orange's name attached, so the reply starts from your program.

  • Review Orange's requirements

    Send us Orange's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Orange to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Orange document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match Orange's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

Orange integration FAQs

Does Orange use EDI with suppliers?

Telecommunications companies commonly use EDI with equipment and device suppliers. This page does not include Orange's requirements.

Can ECOM map serial number data?

ECOM can map the data your ERP and warehouse hold into the ship notice a customer expects and monitor each file.

Which EDI documents are typical for a telecommunications provider?

Typical documents are 850, 855, 856, 810, 846, 860, 997. That is general practice, not Orange's published list.

How does onboarding with Orange usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Orange's requirements, test cycles and your ERP.

Does this guide mean Orange endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Orange.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Orange sets its own requirements and can change them at any time; your Orange implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • Orange: company description Background, not checked against a company source The one-sentence description of Orange comes from general public knowledge and was not checked against Orange's own website for this page.
  • Orange: no company document read Background, not checked against a company source No Orange supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request Orange integration assistance

Tell us about your Orange program, documents and ERP. We will outline the connection, mapping and testing plan.