Automotive integration

Morgan Olson EDI integration

How EDI and API integration with Morgan Olson typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with Morgan Olson.

At a glance

Morgan Olson integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Morgan Olson program or a customer relationship.

Illustration of a car on a road, representing the automotive industry that Morgan Olson operates in.
Industry. Automotive: where Morgan Olson operates.
Workflow diagram: your ERP and warehouse systems exchange documents with Morgan Olson through ECOM. You send 856, 810, 855; you receive 830, 862; 824 and 997 acknowledgments go both ways. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor Morgan Olson 856 810 855 856 810 855 830 862 830 862 824 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Morgan Olson

Tell us which documents you exchange with Morgan Olson, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Morgan Olson.

  • Review of Morgan Olson's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Morgan Olson

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Morgan Olson integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2 or SFTP · EDI network (VAN) · API or web portal
Morgan OlsonIts program, documents and requirements
  1. ConfirmConfirm your Morgan Olson program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Morgan Olson integration

Who this is for: Tier 1, tier 2 and component suppliers, logistics providers and equipment makers that supply Morgan Olson, and the planning, shipping and finance teams that serve them.

Scope: This guide describes typical practice for this kind of trading relationship; Morgan Olson's own program details are confirmed during onboarding.

Morgan Olson builds walk-in delivery vans. ECOM's directory lists it under commercial vehicle bodies. Suppliers to vehicle makers typically work from planning schedules and shipping releases, ship to assembly plants on tight windows, and follow industry labeling and quality practices.

The documents are standard; the differences with a vehicle maker lie in identifiers, timing, labels and how exceptions are handled. Morgan Olson's own EDI or API specification is not part of this guide and no Morgan Olson document was read: treat what follows as typical practice for a vehicle maker, and confirm the documents, X12 version, delivery method and testing steps with Morgan Olson.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Morgan Olson integration gets complicated

Typical requirements—confirm with your trading partner.

Forecast and release changes

Planning schedules change as build plans change. Releases have to update shipping plans without losing track of what is already in transit.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes Morgan Olson has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Returnable containers and labels

Many automotive programs use returnable packaging and standardized labels. The ship notice has to match the labels and the load.

How ECOM helps: ECOM builds the ship notice from your shipment data, checks it against the order and the label data before it is sent, and flags differences you can fix before the load leaves.

What you gain: Fewer receiving problems and compliance deductions caused by notices that do not match the load.

Releases, sequences and returnable packaging

Vehicle assembly runs on firm releases, line-side delivery windows, returnable containers and standardized labels. A wrong ship notice can stop a line or trigger premium freight.

How ECOM helps: ECOM monitors each document and acknowledgment, flags rejected, late or mismatched ones and routes each exception to a named owner with the document history attached.

What you gain: Problems are corrected before they turn into deductions, write-offs or delayed payment.

Line-side delivery windows

Plants run on narrow delivery windows. Late or inaccurate ship notices can disrupt production and trigger premium freight.

How ECOM helps: ECOM connects shipment and status documents to your ERP, WMS or TMS and shows where each one stands, so late or missing messages are seen early.

What you gain: Teams see current status, and fewer shipments are held up by missing documents.

Workflows

Typical Morgan Olson business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Morgan Olson's published process.

Schedule to invoice

  1. 1Receive 830 planning schedule
  2. 2Receive 862 shipping schedule
  3. 3Ship and send 856
  4. 4Send 810 invoice

Acknowledge and correct

  1. 1Send 997 acknowledgment
  2. 2Receive 824 advice
  3. 3Fix and resend
  4. 4Confirm acceptance

Documents and APIs

Morgan Olson documents by program

General guidance. We could not verify Morgan Olson's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Morgan Olson's confirmed requirements. Confirm the list, versions and programs with Morgan Olson.

DocumentNameDirectionProgramStatusPurpose
830 Planning Schedule with Release Capability From Morgan Olson Not stated General guidance Typically gives forecasts and planned requirements by item and date.
862 Shipping Schedule From Morgan Olson Not stated General guidance Typically gives firm shipping requirements, alone or alongside the planning schedule.
856 Ship Notice/Manifest To Morgan Olson Not stated General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
810 Invoice To Morgan Olson Not stated General guidance Typically bills for what shipped, matched against the order.
855 Purchase Order Acknowledgment To Morgan Olson Not stated General guidance Typically confirms an order, or reports changes to quantities, prices or dates.
824 Application Advice Both directions Not stated General guidance Typically reports whether a document was accepted, with the reason when it was not.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2 or SFTP

    Many companies exchange EDI files directly over AS2 or SFTP.

    General guidance

  • EDI network (VAN)

    Many suppliers connect through a value-added network that delivers files to and from the partner and keeps an audit trail.

    General guidance

  • API or web portal

    Some programs use REST or SOAP APIs, a supplier portal or a cloud EDI service for some documents. A login is usually required for portals.

    General guidance

Challenges

Common integration challenges

  • Schedule changes

    Frequent changes to forecasts and releases must reach planning and shipping quickly.

  • Label and ASN accuracy

    The ship notice must match the labeled containers exactly.

  • Premium freight risk

    Late or wrong shipments can cost expedited freight.

  • Cumulative quantities

    Programs often track cumulative received quantities; discrepancies create disputes.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Morgan Olson. ECOM works from them during mapping and testing.

Automation options for Morgan Olson suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet Morgan Olson's labeling and ship notice requirements, and see what needs action. Morgan Olson sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect Morgan Olson documents to your ERP

ECOM connects the documents you exchange with Morgan Olson to your ERP and warehouse systems, so orders post without re-keying and ship notices and invoices come from the data you already hold.

Industry

Automotive

See how ECOM supports EDI for automotive suppliers and manufacturers.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with Morgan Olson typically works

The documents, their order and the timing are Morgan Olson's to set; this is the general sequence most programs of this kind follow.

The documents below belong to two different programs, so they are shown as two separate sequences, not one. Which one applies depends on your agreement with Morgan Olson.

Schedule-driven program

  1. 830 Planning Schedule with Release Capability

    From Morgan Olson to you

    Typically gives forecasts and planned requirements by item and date.

  2. 862 Shipping Schedule

    From Morgan Olson to you

    Typically gives firm shipping requirements, alone or alongside the planning schedule.

  3. 856 Ship Notice/Manifest

    From you to Morgan Olson

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  4. 810 Invoice

    From you to Morgan Olson

    Typically bills for what shipped, matched against the order.

  5. 824 Application Advice

    Both directions

    Typically reports whether a document was accepted, with the reason when it was not.

  6. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Purchase-order program

  1. 855 Purchase Order Acknowledgment

    From you to Morgan Olson

    Typically confirms an order, or reports changes to quantities, prices or dates.

  2. 856 Ship Notice/Manifest

    From you to Morgan Olson

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  3. 810 Invoice

    From you to Morgan Olson

    Typically bills for what shipped, matched against the order.

  4. 824 Application Advice

    Both directions

    Typically reports whether a document was accepted, with the reason when it was not.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Morgan Olson program

Each request goes to an ECOM EDI specialist with Morgan Olson's name attached, so the reply starts from your program.

  • Review Morgan Olson's requirements

    Send us Morgan Olson's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Morgan Olson to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Morgan Olson document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match Morgan Olson's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

Morgan Olson integration FAQs

Does Morgan Olson use EDI with suppliers?

Vehicle makers commonly exchange EDI with suppliers, often through programs with specific labels and portals. This page does not include Morgan Olson's requirements.

What is the difference between 830 and 862?

The 830 planning schedule gives forecasts and planned requirements; the 862 shipping schedule gives firm shipping requirements. A supplier may receive one or both depending on the program.

Which EDI documents are typical for a vehicle maker?

Typical documents are 830, 862, 856, 810, 855, 824, 997. That is general practice, not Morgan Olson's published list.

How does onboarding with Morgan Olson usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Morgan Olson's requirements, test cycles and your ERP.

Does this guide mean Morgan Olson endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Morgan Olson.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Morgan Olson sets its own requirements and can change them at any time; your Morgan Olson implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • Morgan Olson: company description Background, not checked against a company source The one-sentence description of Morgan Olson comes from general public knowledge and was not checked against Morgan Olson's own website for this page.
  • Morgan Olson: no company document read Background, not checked against a company source No Morgan Olson supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request Morgan Olson integration assistance

Tell us about your Morgan Olson program, documents and ERP. We will outline the connection, mapping and testing plan.