Carriers integration

Daseke EDI integration

How EDI and API integration with Daseke typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with Daseke.

Company status: TFI International completed its acquisition of Daseke on April 1, 2024. Daseke's brands now operate within TFI International's truckload segment, so confirm with the carrier which entity and which connection applies. Checked 2026-11-12 · source.

At a glance

Daseke integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Daseke program or a customer relationship.

Illustration of a freight truck on a highway, representing the carriers industry that Daseke operates in.
Industry. Carriers: where Daseke operates.
Workflow diagram: your TMS, ERP and finance systems exchange documents with Daseke through ECOM. You send 204; you receive 990, 214, 210; 997 acknowledgments go both ways. Your systems TMS · ERP · finance ECOM integration map · validate · connect · monitor Daseke 204 204 990 214 210 990 214 210 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Tenders and invoices re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Daseke

Tell us which documents you exchange with Daseke, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Daseke.

  • Review of Daseke's requirements with you, once you have them
  • EDI and API integration with your TMS, ERP and finance systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Daseke

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Daseke integration fits your systems

Your systemsTMS, ERP and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Carrier API · Portal or TMS network
DasekeIts program, documents and requirements
  1. ConfirmConfirm your Daseke program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Daseke integration

Who this is for: Shippers, brokers and logistics providers that tender freight to Daseke, and their transportation and finance teams.

Scope: This guide describes typical practice for this kind of trading relationship; Daseke's own program details are confirmed during onboarding.

Daseke is a flatbed and specialized trucking company. ECOM's directory lists it under flatbed and specialized. Shippers working with truckload and specialized carriers typically tender loads, receive acceptance and status updates, and receive freight invoices. Daseke acquired by TFI International in 2024.

Teams that work with a truckload or specialized trucking carrier gain most from fast tender responses and status they can trust. Daseke's own EDI or API specification is not part of this guide and no Daseke document was read: treat what follows as typical practice for a truckload or specialized trucking carrier, and confirm the documents, X12 version, delivery method and testing steps with Daseke.

ECOM maps the documents to your TMS, ERP and finance systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Daseke integration gets complicated

Typical requirements—confirm with your trading partner.

Equipment and permits

Flatbed and specialized freight depends on equipment type, dimensions and sometimes permits, which must be in the tender.

How ECOM helps: ECOM connects tender, response and status messages (204, 990, 214) to your TMS or ERP and shows where each load stands, flagging missing or late status.

What you gain: Planners see current load status, and late or missing messages are noticed early.

Freight invoice audit

Invoices should match the load, the rate and any accessorial charges.

How ECOM helps: ECOM matches freight invoices (210) to the tender (204) and status (214) history and lists charges that differ from the agreed rate or have no supporting event, so they can be reviewed before payment.

What you gain: Fewer overcharges paid, and less manual freight audit work.

Seasonal capacity swings

Capacity tightens in peaks; fast tender responses matter.

How ECOM helps: ECOM runs the connection as a monitored service and watches queues and acknowledgments through busy periods, so a spike does not leave documents waiting.

What you gain: Busy periods run on the same process, without manual catch-up.

Adding a lane or customer

New lanes and customers require new reference data in every system.

How ECOM helps: ECOM runs onboarding as a project: we confirm Daseke's requirements with you, map the documents, build the connection and run test cycles until Daseke accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Workflows

Typical Daseke business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Daseke's published process.

Tender to invoice

  1. 1Send 204 load tender
  2. 2Receive 990 response
  3. 3Receive 214 status updates
  4. 4Receive 210 invoice

Exception handling

  1. 1Spot late or missing status
  2. 2Contact the carrier
  3. 3Update the shipment
  4. 4Reconcile charges

Documents and APIs

Daseke documents by program

General guidance. We could not verify Daseke's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Daseke's confirmed requirements. Confirm the list, versions and programs with Daseke.

DocumentNameDirectionProgramStatusPurpose
204 Motor Carrier Load Tender To Daseke Not stated General guidance Typically offers a load to a carrier with pickup, delivery and shipment details.
990 Response to a Load Tender From Daseke Not stated General guidance Typically accepts or declines an offered load.
214 Transportation Carrier Shipment Status Message From Daseke Not stated General guidance Typically reports pickup, location updates and delivery.
210 Motor Carrier Freight Details and Invoice From Daseke Not stated General guidance Typically bills for freight, with charge detail, in the shipper's payables format.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Carriers and brokers commonly exchange EDI over AS2, SFTP or a value-added network.

    General guidance

  • Carrier API

    Many carriers also expose tracking, rating or tender APIs next to EDI.

    General guidance

  • Portal or TMS network

    Some carriers and brokers work through a customer portal or a transportation management network instead of, or beside, direct EDI.

    General guidance

Challenges

Common integration challenges

  • Tender response time

    Slow responses delay re-tendering. Confirm how it applies with Daseke.

  • Status gaps

    Missing updates hide delays. Details depend on your agreement with Daseke.

  • Invoice matching

    Charges must match rate and load detail.

  • Equipment and special requirements

    Specialized freight needs extra detail in the tender.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Daseke. ECOM works from them during mapping and testing.

Automation options for Daseke shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. Daseke sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

General EDI flow

How EDI with Daseke typically works

The documents, their order and the timing are Daseke's to set; this is the general sequence most programs of this kind follow.

  1. 204 Motor Carrier Load Tender

    From you to Daseke

    Typically offers a load to a carrier with pickup, delivery and shipment details.

  2. 990 Response to a Load Tender

    From Daseke to you

    Typically accepts or declines an offered load.

  3. 214 Transportation Carrier Shipment Status Message

    From Daseke to you

    Typically reports pickup, location updates and delivery.

  4. 210 Motor Carrier Freight Details and Invoice

    From Daseke to you

    Typically bills for freight, with charge detail, in the shipper's payables format.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Daseke program

Each request goes to an ECOM EDI specialist with Daseke's name attached, so the reply starts from your program.

  • Review Daseke's requirements

    Send us Daseke's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Daseke to your ERP

    Tenders, status and freight invoices in and out of the TMS, ERP and finance systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Daseke document, then go live with monitoring from the first file.

    Plan testing and certification

Daseke integration FAQs

Does Daseke use EDI with shippers?

Truckload carriers commonly exchange EDI or APIs with shippers and brokers. This page does not include Daseke's requirements.

Which documents does a shipper usually exchange with a carrier?

Typically the 204 load tender, 990 response, 214 status and 210 invoice, with 997 acknowledgments. Exact use varies.

Which EDI documents are typical for carriers?

Typical documents are 204, 990, 214, 210, 997. That is general practice, not Daseke's published list.

How does onboarding with Daseke usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Daseke's requirements, test cycles and your ERP.

Does this guide mean Daseke endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Daseke.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Daseke sets its own requirements and can change them at any time; your Daseke implementation guide, supplier portal or account contact is the authoritative source for your program.

Request Daseke integration assistance

Tell us about your Daseke program, documents and ERP. We will outline the connection, mapping and testing plan.