Carriers integration

Hoegh Autoliners EDI integration

How EDI and API integration with Hoegh Autoliners typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with Hoegh Autoliners.

At a glance

Hoegh Autoliners integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Hoegh Autoliners program or a customer relationship.

Illustration of a container ship at sea, representing the carriers industry that Hoegh Autoliners operates in.
Industry. Carriers: where Hoegh Autoliners operates.
Workflow diagram: your TMS, ERP and finance systems exchange documents with Hoegh Autoliners through ECOM. You send 300; you receive 301, 315, 310; 997 acknowledgments go both ways. Your systems TMS · ERP · finance ECOM integration map · validate · connect · monitor Hoegh Autoliners 300 300 301 315 310 301 315 310 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Tenders and invoices re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Hoegh Autoliners

Tell us which documents you exchange with Hoegh Autoliners, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Hoegh Autoliners.

  • Review of Hoegh Autoliners' requirements with you, once you have them
  • EDI and API integration with your TMS, ERP and finance systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Hoegh Autoliners

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Hoegh Autoliners integration fits your systems

Your systemsTMS, ERP and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Carrier API · Portal or TMS network
Hoegh AutolinersIts program, documents and requirements
  1. ConfirmConfirm your Hoegh Autoliners program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Hoegh Autoliners integration

Who this is for: Importers, exporters, forwarders and logistics providers that book cargo with Hoegh Autoliners, and their logistics and finance teams.

Scope: This guide describes typical practice for this kind of trading relationship; Hoegh Autoliners's own program details are confirmed during onboarding.

Hoegh Autoliners provides ocean transportation for vehicles and rolling cargo. ECOM's directory lists it under ocean vehicle logistics. Shippers and forwarders working with ocean carriers typically send booking requests, receive confirmations, track milestones and receive freight invoices, alongside bill of lading and customs processes.

Teams that work with an ocean carrier gain most from fast tender responses and status they can trust. Hoegh Autoliners' own EDI or API specification is not part of this guide and no Hoegh Autoliners document was read: treat what follows as typical practice for an ocean carrier, and confirm the documents, X12 version, delivery method and testing steps with Hoegh Autoliners.

ECOM maps the documents to your TMS, ERP and finance systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Hoegh Autoliners integration gets complicated

Typical requirements—confirm with your trading partner.

Booking changes and rolled cargo

Vessel changes and rolled cargo alter plans. Booking and milestone data have to reach planners quickly.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes Hoegh Autoliners has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Bookings, containers and milestones

Ocean freight links bookings, containers and bills of lading through milestones, with time-based charges that depend on accurate dates.

How ECOM helps: ECOM connects tender, response and status messages to your TMS or ERP and shows where each load stands, flagging missing or late status.

What you gain: Planners see current load status, and late or missing messages are noticed early.

Charges and demurrage

Invoices include many charges, and time-based charges depend on accurate dates.

How ECOM helps: ECOM maps freight invoice and payment data to your ERP and finance systems and matches each charge to the load it belongs to, with differences listed for review.

What you gain: Faster freight payment and a clear trail for audit.

Seasonal capacity swings

Capacity tightens in peaks; fast tender responses matter.

How ECOM helps: ECOM runs the connection as a monitored service and watches queues and acknowledgments through busy periods, so a spike does not leave documents waiting.

What you gain: Busy periods run on the same process, without manual catch-up.

Workflows

Typical Hoegh Autoliners business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Hoegh Autoliners' published process.

Booking to invoice

  1. 1Send 300 booking request
  2. 2Receive 301 confirmation
  3. 3Receive 315 milestones
  4. 4Receive 310 invoice

Exception handling

  1. 1Spot a rolled or late shipment
  2. 2Contact the carrier
  3. 3Update the plan
  4. 4Reconcile charges

Documents and APIs

Hoegh Autoliners documents by program

General guidance. We could not verify Hoegh Autoliners' EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Hoegh Autoliners' confirmed requirements. Confirm the list, versions and programs with Hoegh Autoliners.

DocumentNameDirectionProgramStatusPurpose
300 Reservation (Booking Request) (Ocean) To Hoegh Autoliners Not stated General guidance Typically requests space or a booking on a vessel.
301 Confirmation (Ocean) From Hoegh Autoliners Not stated General guidance Typically confirms a booking with sailing and equipment details.
315 Status Details (Ocean) From Hoegh Autoliners Not stated General guidance Typically reports shipment milestones such as gate-in, loaded and discharged.
310 Freight Receipt and Invoice (Ocean) From Hoegh Autoliners Not stated General guidance Typically bills an ocean shipment with freight and charge detail.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Carriers and brokers commonly exchange EDI over AS2, SFTP or a value-added network.

    General guidance

  • Carrier API

    Many carriers also expose tracking, rating or tender APIs next to EDI.

    General guidance

  • Portal or TMS network

    Some carriers and brokers work through a customer portal or a transportation management network instead of, or beside, direct EDI.

    General guidance

Challenges

Common integration challenges

  • Booking data

    Booking, container and bill of lading references must connect.

  • Milestone gaps

    Missing events hide delays. Details depend on your agreement with Hoegh Autoliners.

  • Charge detail

    Invoice lines vary by lane. Ask Hoegh Autoliners how this applies to your program.

  • Multiple carriers

    Each carrier has its own formats and portals.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Hoegh Autoliners. ECOM works from them during mapping and testing.

Automation options for Hoegh Autoliners shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. Hoegh Autoliners sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

General EDI flow

How EDI with Hoegh Autoliners typically works

The documents, their order and the timing are Hoegh Autoliners' to set; this is the general sequence most programs of this kind follow.

  1. 300 Reservation (Booking Request) (Ocean)

    From you to Hoegh Autoliners

    Typically requests space or a booking on a vessel.

  2. 301 Confirmation (Ocean)

    From Hoegh Autoliners to you

    Typically confirms a booking with sailing and equipment details.

  3. 315 Status Details (Ocean)

    From Hoegh Autoliners to you

    Typically reports shipment milestones such as gate-in, loaded and discharged.

  4. 310 Freight Receipt and Invoice (Ocean)

    From Hoegh Autoliners to you

    Typically bills an ocean shipment with freight and charge detail.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Hoegh Autoliners program

Each request goes to an ECOM EDI specialist with Hoegh Autoliners' name attached, so the reply starts from your program.

  • Review Hoegh Autoliners' requirements

    Send us Hoegh Autoliners' guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Hoegh Autoliners to your ERP

    Tenders, status and freight invoices in and out of the TMS, ERP and finance systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Hoegh Autoliners document, then go live with monitoring from the first file.

    Plan testing and certification

Hoegh Autoliners integration FAQs

Does Hoegh Autoliners use EDI with customers?

Ocean carriers commonly offer EDI and APIs for bookings, milestones and invoices. This page does not include Hoegh Autoliners' requirements.

Which documents are typical for ocean freight?

Typically a booking request, a confirmation, milestone status and a freight invoice. Exact usage varies by carrier and program.

Which EDI documents are typical for carriers?

Typical documents are 300, 301, 315, 310, 997. That is general practice, not Hoegh Autoliners' published list.

How does onboarding with Hoegh Autoliners usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Hoegh Autoliners' requirements, test cycles and your ERP.

Does this guide mean Hoegh Autoliners endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Hoegh Autoliners.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Hoegh Autoliners sets its own requirements and can change them at any time; your Hoegh Autoliners implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • Hoegh Autoliners: company description Background, not checked against a company source The one-sentence description of Hoegh Autoliners comes from general public knowledge and was not checked against Hoegh Autoliners' own website for this page.
  • Hoegh Autoliners: no company document read Background, not checked against a company source No Hoegh Autoliners supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request Hoegh Autoliners integration assistance

Tell us about your Hoegh Autoliners program, documents and ERP. We will outline the connection, mapping and testing plan.