Carriers integration

Wallenius Wilhelmsen EDI integration

How EDI and API integration with Wallenius Wilhelmsen typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with Wallenius Wilhelmsen.

At a glance

Wallenius Wilhelmsen integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific Wallenius Wilhelmsen program or a customer relationship.

Illustration of a container ship at sea, representing the carriers industry that Wallenius Wilhelmsen operates in.
Industry. Carriers: where Wallenius Wilhelmsen operates.
Workflow diagram: your TMS, ERP and finance systems exchange documents with Wallenius Wilhelmsen through ECOM. You send 300; you receive 301, 315, 310; 997 acknowledgments go both ways. Your systems TMS · ERP · finance ECOM integration map · validate · connect · monitor Wallenius Wilhelmsen 300 300 301 315 310 301 315 310 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Tenders and invoices re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about Wallenius Wilhelmsen

Tell us which documents you exchange with Wallenius Wilhelmsen, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with Wallenius Wilhelmsen.

  • Review of Wallenius Wilhelmsen's requirements with you, once you have them
  • EDI and API integration with your TMS, ERP and finance systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
Wallenius Wilhelmsen

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How Wallenius Wilhelmsen integration fits your systems

Your systemsTMS, ERP and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Carrier API · Portal or TMS network
Wallenius WilhelmsenIts program, documents and requirements
  1. ConfirmConfirm your Wallenius Wilhelmsen program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding Wallenius Wilhelmsen integration

Who this is for: Importers, exporters, forwarders and logistics providers that book cargo with Wallenius Wilhelmsen, and their logistics and finance teams.

Scope: This guide describes typical practice for this kind of trading relationship; Wallenius Wilhelmsen's own program details are confirmed during onboarding.

Wallenius Wilhelmsen provides ocean transportation for vehicles and rolling cargo. ECOM's directory lists it under ocean vehicle logistics. Shippers and forwarders working with ocean carriers typically send booking requests, receive confirmations, track milestones and receive freight invoices, alongside bill of lading and customs processes.

With an ocean carrier, the difficulty is keeping tenders, status events and invoices consistent with each other, and noticing a missing message early. Wallenius Wilhelmsen's own EDI or API specification is not part of this guide and no Wallenius Wilhelmsen document was read: treat what follows as typical practice for an ocean carrier, and confirm the documents, X12 version, delivery method and testing steps with Wallenius Wilhelmsen.

ECOM maps the documents to your TMS, ERP and finance systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where Wallenius Wilhelmsen integration gets complicated

Typical requirements—confirm with your trading partner.

Booking changes and rolled cargo

Vessel changes and rolled cargo alter plans. Booking and milestone data have to reach planners quickly.

How ECOM helps: ECOM carries each change through to the acknowledgment, shipment and invoice so every document reflects the latest version, and flags changes Wallenius Wilhelmsen has not acknowledged.

What you gain: Shipments and invoices stay in step with the order after changes.

Bookings, containers and milestones

Ocean freight links bookings, containers and bills of lading through milestones, with time-based charges that depend on accurate dates.

How ECOM helps: ECOM connects tender, response and status messages to your TMS or ERP and shows where each load stands, flagging missing or late status.

What you gain: Planners see current load status, and late or missing messages are noticed early.

Charges and demurrage

Invoices include many charges, and time-based charges depend on accurate dates.

How ECOM helps: ECOM maps freight invoice and payment data to your ERP and finance systems and matches each charge to the load it belongs to, with differences listed for review.

What you gain: Faster freight payment and a clear trail for audit.

Rate or accessorial disputes

Invoices that differ from the agreed rate or add accessorials create audit work.

How ECOM helps: ECOM matches freight invoices to the tender and status history and lists charges that differ from the agreed rate or have no supporting event, so they can be reviewed before payment.

What you gain: Fewer overcharges paid, and less manual freight audit work.

Workflows

Typical Wallenius Wilhelmsen business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not Wallenius Wilhelmsen's published process.

Booking to invoice

  1. 1Send 300 booking request
  2. 2Receive 301 confirmation
  3. 3Receive 315 milestones
  4. 4Receive 310 invoice

Exception handling

  1. 1Spot a rolled or late shipment
  2. 2Contact the carrier
  3. 3Update the plan
  4. 4Reconcile charges

Documents and APIs

Wallenius Wilhelmsen documents by program

General guidance. We could not verify Wallenius Wilhelmsen's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not Wallenius Wilhelmsen's confirmed requirements. Confirm the list, versions and programs with Wallenius Wilhelmsen.

DocumentNameDirectionProgramStatusPurpose
300 Reservation (Booking Request) (Ocean) To Wallenius Wilhelmsen Not stated General guidance Typically requests space or a booking on a vessel.
301 Confirmation (Ocean) From Wallenius Wilhelmsen Not stated General guidance Typically confirms a booking with sailing and equipment details.
315 Status Details (Ocean) From Wallenius Wilhelmsen Not stated General guidance Typically reports shipment milestones such as gate-in, loaded and discharged.
310 Freight Receipt and Invoice (Ocean) From Wallenius Wilhelmsen Not stated General guidance Typically bills an ocean shipment with freight and charge detail.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Carriers and brokers commonly exchange EDI over AS2, SFTP or a value-added network.

    General guidance

  • Carrier API

    Many carriers also expose tracking, rating or tender APIs next to EDI.

    General guidance

  • Portal or TMS network

    Some carriers and brokers work through a customer portal or a transportation management network instead of, or beside, direct EDI.

    General guidance

Challenges

Common integration challenges

  • Booking data

    Booking, container and bill of lading references must connect.

  • Milestone gaps

    Missing events hide delays. Details depend on your agreement with Wallenius Wilhelmsen.

  • Charge detail

    Invoice lines vary by lane. Ask Wallenius Wilhelmsen how this applies to your program.

  • Multiple carriers

    Each carrier has its own formats and portals.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by Wallenius Wilhelmsen. ECOM works from them during mapping and testing.

Automation options for Wallenius Wilhelmsen shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. Wallenius Wilhelmsen sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

General EDI flow

How EDI with Wallenius Wilhelmsen typically works

The documents, their order and the timing are Wallenius Wilhelmsen's to set; this is the general sequence most programs of this kind follow.

  1. 300 Reservation (Booking Request) (Ocean)

    From you to Wallenius Wilhelmsen

    Typically requests space or a booking on a vessel.

  2. 301 Confirmation (Ocean)

    From Wallenius Wilhelmsen to you

    Typically confirms a booking with sailing and equipment details.

  3. 315 Status Details (Ocean)

    From Wallenius Wilhelmsen to you

    Typically reports shipment milestones such as gate-in, loaded and discharged.

  4. 310 Freight Receipt and Invoice (Ocean)

    From Wallenius Wilhelmsen to you

    Typically bills an ocean shipment with freight and charge detail.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your Wallenius Wilhelmsen program

Each request goes to an ECOM EDI specialist with Wallenius Wilhelmsen's name attached, so the reply starts from your program.

  • Review Wallenius Wilhelmsen's requirements

    Send us Wallenius Wilhelmsen's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect Wallenius Wilhelmsen to your ERP

    Tenders, status and freight invoices in and out of the TMS, ERP and finance systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each Wallenius Wilhelmsen document, then go live with monitoring from the first file.

    Plan testing and certification

Wallenius Wilhelmsen integration FAQs

Does Wallenius Wilhelmsen use EDI with customers?

Ocean carriers commonly offer EDI and APIs for bookings, milestones and invoices. This page does not include Wallenius Wilhelmsen's requirements.

Which documents are typical for ocean freight?

Typically a booking request, a confirmation, milestone status and a freight invoice. Exact usage varies by carrier and program.

Which EDI documents are typical for carriers?

Typical documents are 300, 301, 315, 310, 997. That is general practice, not Wallenius Wilhelmsen's published list.

How does onboarding with Wallenius Wilhelmsen usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on Wallenius Wilhelmsen's requirements, test cycles and your ERP.

Does this guide mean Wallenius Wilhelmsen endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by Wallenius Wilhelmsen.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. Wallenius Wilhelmsen sets its own requirements and can change them at any time; your Wallenius Wilhelmsen implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • Wallenius Wilhelmsen: company description Background, not checked against a company source The one-sentence description of Wallenius Wilhelmsen comes from general public knowledge and was not checked against Wallenius Wilhelmsen's own website for this page.
  • Wallenius Wilhelmsen: no company document read Background, not checked against a company source No Wallenius Wilhelmsen supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request Wallenius Wilhelmsen integration assistance

Tell us about your Wallenius Wilhelmsen program, documents and ERP. We will outline the connection, mapping and testing plan.