Carriers integration

UPS Supply Chain Solutions EDI integration

How EDI and API integration with UPS Supply Chain Solutions typically works: freight brokerage and logistics documents, workflows, onboarding and common problems, as typical practice to confirm with UPS Supply Chain Solutions.

At a glance

UPS Supply Chain Solutions integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific UPS Supply Chain Solutions program or a customer relationship.

Illustration of a freight truck on a highway, representing the carriers industry that UPS Supply Chain Solutions operates in.
Industry. Carriers: where UPS Supply Chain Solutions operates.
Workflow diagram: your TMS, ERP and finance systems exchange documents with UPS Supply Chain Solutions through ECOM. You send 204; you receive 990, 214, 210; 997 acknowledgments go both ways. Your systems TMS · ERP · finance ECOM integration map · validate · connect · monitor UPS Supply Chain Solutions 204 204 990 214 210 990 214 210 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Tenders and invoices re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about UPS Supply Chain Solutions

Tell us which documents you exchange with UPS Supply Chain Solutions, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with UPS Supply Chain Solutions.

  • Review of UPS Supply Chain Solutions' requirements with you, once you have them
  • EDI and API integration with your TMS, ERP and finance systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
UPS Supply Chain Solutions

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How UPS Supply Chain Solutions integration fits your systems

Your systemsTMS, ERP and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Carrier and TMS APIs · Portal or TMS network
UPS Supply Chain SolutionsIts program, documents and requirements
  1. ConfirmConfirm your UPS Supply Chain Solutions program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding UPS Supply Chain Solutions integration

Who this is for: Shippers, carriers and logistics teams that tender freight to or work as capacity partners with UPS Supply Chain Solutions, and their transportation and finance teams.

Scope: This guide describes typical practice for this kind of trading relationship; UPS Supply Chain Solutions's own program details are confirmed during onboarding.

UPS Supply Chain Solutions is the logistics and freight forwarding business of UPS, with contract logistics, freight forwarding and distribution. ECOM's directory lists UPS Supply Chain Solutions under freight brokerage and logistics.

UPS Supply Chain Solutions is separate from UPS parcel services, so confirm which UPS business and documents apply to your program. A broker or asset-light provider sits between shipper and carrier, so there are two EDI relationships to keep consistent: the shipper tender and status flow, and the carrier tender, status and settlement flow. Margin, accessorial approval and carrier payment terms all depend on the documents matching across both sides. The document set below is typical practice for this type of company; confirm the documents, X12 version, delivery method and testing steps with UPS Supply Chain Solutions for your own program.

ECOM helps confirm your trading program, map the required documents, configure connectivity, and complete testing against the applicable specifications. It then monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where UPS Supply Chain Solutions integration gets complicated

Typical requirements—confirm with your trading partner.

Load and status visibility for freight forwarding and distribution

Shippers that use UPS Supply Chain Solutions for freight forwarding and distribution need tender responses and status events in their own systems rather than checking a carrier portal.

How ECOM helps: ECOM maps tender, response and status messages to your TMS or ERP and flags missing or late events.

What you gain: Planners see current status and late events are noticed early.

Freight invoice matching

Charges from UPS Supply Chain Solutions for freight forwarding and distribution must be tied to the load, service and rate that were agreed.

How ECOM helps: ECOM matches each invoice to the tender and status history and lists charges that differ or have no supporting event.

What you gain: Fewer overcharges paid and faster approval.

Workflows

Typical UPS Supply Chain Solutions business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not UPS Supply Chain Solutions' published process.

Tender to delivery

  1. 1Send load tender
  2. 2Receive acceptance
  3. 3Receive 214 status
  4. 4Confirm delivery

Billing to settlement

  1. 1Receive 210 invoice
  2. 2Match to tender and status
  3. 3Review accessorials
  4. 4Approve and pay

Documents and APIs

UPS Supply Chain Solutions documents by program

General guidance. We could not verify UPS Supply Chain Solutions' EDI requirements from a published source, so these are documents commonly exchanged in this industry, not UPS Supply Chain Solutions' confirmed requirements. Confirm the list, versions and programs with UPS Supply Chain Solutions.

DocumentNameDirectionProgramStatusPurpose
204 Motor Carrier Load Tender To UPS Supply Chain Solutions Not stated General guidance Typically offers a load to the carrier with pickup, delivery, equipment and reference details.
990 Response to a Load Tender From UPS Supply Chain Solutions Not stated General guidance Typically accepts or declines the offered load.
214 Transportation Carrier Shipment Status Message From UPS Supply Chain Solutions Not stated General guidance Typically reports pickup, in-transit events, appointment and delivery.
210 Motor Carrier Freight Details and Invoice From UPS Supply Chain Solutions Not stated General guidance Typically bills for freight with charge detail in the shipper payables format.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms each file was received and could be read.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Brokers and 3PLs commonly exchange EDI over AS2, SFTP or a value-added network.

    General guidance

  • Carrier and TMS APIs

    Many providers expose tender, rating and tracking APIs beside EDI.

    General guidance

  • Portal or TMS network

    Some programs work through a customer portal or a transportation management network instead of, or beside, direct EDI.

    General guidance

Challenges

Common integration challenges

  • Reference data quality

    Missing or inconsistent load, order or shipment references make documents hard to match across systems.

  • Exception ownership

    Late, missing or rejected messages need a clear owner on both sides so problems are fixed before they reach billing.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by UPS Supply Chain Solutions. ECOM works from them during mapping and testing.

Automation options for UPS Supply Chain Solutions shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. UPS Supply Chain Solutions sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect UPS Supply Chain Solutions documents to your ERP

ECOM connects the tender, status and invoice documents you exchange with UPS Supply Chain Solutions to your TMS and ERP, so loads, freight cost and carrier settlement stay matched and exceptions are visible early.

Solution

Logistics Automation

Automate tenders, status, appointments and freight invoices.

Industry

Carriers & Freight Transportation

See how ECOM supports shippers, carriers, brokers and forwarders.

Solution

Supply Chain Visibility

See status and exceptions across carriers and modes in one place.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

Zero Trust for freight data exchange

Zero Trust EDI and MFT for your UPS Supply Chain Solutions connection

Freight exchanges with UPS Supply Chain Solutions carry tenders, status events, rates and freight invoices. A Zero Trust design assumes no connection, file or user is safe by default.

ECOM has implemented Zero Trust EDI and Zero Trust MFT in trucking.

For freight exchanges this means each carrier has its own scope, tenders, status messages and invoices are checked at the connection and the file, a late or missing file is noticed early, and every transfer has a record for freight billing disputes and security reviews.

  • Authentication

    Every connection proves who it is: partner-specific accounts with SSH keys or certificates over SFTP, FTPS, HTTPS or AS2, never a shared login.

    Business outcome: A lost or reused credential affects one partner, not all of them.

  • Least privilege

    Each partner and user reaches only its own folders, file types and actions. Internal user permissions are managed centrally and reviewed with you.

    Business outcome: A mistake or compromise in one account stays limited to what that account could reach.

  • Isolation

    Partners are kept apart by account and file area. Where your design calls for it, a proxy or DMZ keeps outside connections away from internal systems. The design follows your architecture.

    Business outcome: Outside connections do not land directly on your internal systems.

  • Encryption

    Encrypted protocols in transit and PGP for files at rest. Encryption protects the data. It is one control, and not Zero Trust on its own.

    Business outcome: Less exposure if a file is intercepted or a file store is reached.

  • Certificate and key management

    Partner keys and certificates are managed centrally. Renewal and rotation are planned with you, so an expiring certificate does not stop a flow.

    Business outcome: Fewer outages caused by an expired certificate or key.

  • Monitoring and access controls

    Real-time transfer status and alerts for late, missing or failed files, so unexpected access or a broken flow is seen quickly.

    Business outcome: Late, missing or failed files are noticed early, before they hold up tenders, status or freight billing.

  • Audit trail

    Every transfer is logged with sender, receiver, time and outcome, which supports your own review and audit work.

    Business outcome: You can answer who sent what and when, for your own audits and partner reviews.

What this means for your data

Carrier onboarding

Each carrier or broker gets its own identity and scope. A new carrier is tested before it reaches production, and a removed carrier loses access without affecting the others.

Tenders, status and invoices

Load tenders, status messages and freight invoices are checked at the connection and the file, and every transfer is logged.

Rates and contract data

Rate and accessorial files are limited to the roles that need them.

Zero Trust is an approach, not a product or a certification. ECOM covers the EDI and file-transfer side. Your identity, network and endpoint controls stay yours, and so does the assessment of your own compliance obligations. ECOM does not guarantee compliance or any security outcome. UPS Supply Chain Solutions may set its own security requirements, which come first.

General EDI flow

How EDI with UPS Supply Chain Solutions typically works

The documents, their order and the timing are UPS Supply Chain Solutions' to set; this is the general sequence most programs of this kind follow.

  1. 204 Motor Carrier Load Tender

    From you to UPS Supply Chain Solutions

    Typically offers a load to the carrier with pickup, delivery, equipment and reference details.

  2. 990 Response to a Load Tender

    From UPS Supply Chain Solutions to you

    Typically accepts or declines the offered load.

  3. 214 Transportation Carrier Shipment Status Message

    From UPS Supply Chain Solutions to you

    Typically reports pickup, in-transit events, appointment and delivery.

  4. 210 Motor Carrier Freight Details and Invoice

    From UPS Supply Chain Solutions to you

    Typically bills for freight with charge detail in the shipper payables format.

  5. 997 Functional Acknowledgment

    Both directions

    Typically confirms each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your UPS Supply Chain Solutions program

Each request goes to an ECOM EDI specialist with UPS Supply Chain Solutions' name attached, so the reply starts from your program.

  • Review UPS Supply Chain Solutions' requirements

    Send us UPS Supply Chain Solutions' guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect UPS Supply Chain Solutions to your ERP

    Tenders, status and freight invoices in and out of the TMS, ERP and finance systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each UPS Supply Chain Solutions document, then go live with monitoring from the first file.

    Plan testing and certification

UPS Supply Chain Solutions integration FAQs

Does UPS Supply Chain Solutions use EDI with customers and partners?

Companies of this type commonly exchange EDI or APIs with their customers and partners. This guide reflects typical industry practice rather than UPS Supply Chain Solutions's published requirements.

Why match status events to freight invoices?

Matching shows whether a charge is supported by a pickup, delivery or accessorial event, which is the basis of freight audit and dispute handling.

Which EDI documents are typical for UPS Supply Chain Solutions's type of business?

Typical documents are 204, 990, 214, 210, 997. That is general practice, not UPS Supply Chain Solutions's published list.

How does onboarding with UPS Supply Chain Solutions usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on UPS Supply Chain Solutions's requirements, test cycles and your ERP.

Does this guide mean UPS Supply Chain Solutions endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by UPS Supply Chain Solutions.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. UPS Supply Chain Solutions sets its own requirements and can change them at any time; your UPS Supply Chain Solutions implementation guide, supplier portal or account contact is the authoritative source for your program.

  • UPS Supply Chain Solutions: company website Official UPS Supply Chain Solutions source
  • ASC X12: transaction set reference (standards body) Standards reference
  • UPS Supply Chain Solutions: company description Background, not checked against a company source The description of UPS Supply Chain Solutions comes from general public knowledge and was not checked against UPS Supply Chain Solutions's own website for this page.
  • UPS Supply Chain Solutions: no company document read Background, not checked against a company source No UPS Supply Chain Solutions supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request UPS Supply Chain Solutions integration assistance

Tell us about your UPS Supply Chain Solutions program, documents and ERP. We will outline the connection, mapping and testing plan.