Third-Party Logistics integration

J.B. Hunt EDI and API integration

J.B. Hunt describes API and EDI connectivity, integrations with major TMS providers and the J.B. Hunt 360 platform for quoting, booking and tracking. See how ECOM helps connect them to your systems.

At a glance

J.B. Hunt integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific J.B. Hunt program or a customer relationship.

Illustration of a freight truck on a highway, representing the third-party logistics industry that J.B. Hunt operates in.
Industry. Third-Party Logistics: where J.B. Hunt operates.
Workflow diagram: your TMS, ERP and finance systems exchange documents with J.B. Hunt through ECOM. You send 204; you receive 990, 214, 210; 997 acknowledgments go both ways. Your systems TMS · ERP · finance ECOM integration map · validate · connect · monitor J.B. Hunt 204 204 990 214 210 990 214 210 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Tenders and invoices re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about J.B. Hunt

Tell us which documents you exchange with J.B. Hunt, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with J.B. Hunt.

  • Review of J.B. Hunt's requirements with you, once you have them
  • EDI and API integration with your TMS, ERP and finance systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
J.B. Hunt

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How J.B. Hunt integration fits your systems

Your systemsTMS, ERP and accounting
ECOMMapping, validation, connectivity and monitoringAPI and EDI connectivity · TMS integrations · J.B. Hunt 360 platform and API catalog
J.B. HuntIts program, documents and requirements
  1. ConfirmConfirm your J.B. Hunt program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding J.B. Hunt integration

Who this is for: Shippers, brokers and logistics teams that tender freight with J.B. Hunt, and the transportation, IT and finance staff who connect those shipments to a TMS or ERP.

Scope: API, EDI and TMS connectivity come from J.B. Hunt pages. EDI set numbers and the service lines covered are not published there; the documents shown are typical practice.

Shippers using J.B. Hunt need freight data to move between their TMS or ERP and the carrier: tenders and booking out, and status, documents and invoices back. The question is which of those run on EDI and which on API.

J.B. Hunt says that through API and EDI connectivity it helps shippers automate and simplify how information is shared, integrates with leading TMS vendors using APIs, and offers the J.B. Hunt 360 platform for self-service quoting, booking, tracking and document access, with public APIs in an API catalog and a dedicated onboarding team for integration and testing. The pages read do not list EDI transaction set numbers or the service lines each connection covers, so the documents below are typical practice for tendered freight.

ECOM helps confirm your trading program, map the required documents, configure connectivity, and complete testing against the applicable specifications. It then monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where J.B. Hunt integration gets complicated

Typical requirements—confirm with your trading partner.

Tender, acceptance and tracking

Shippers that tender truckload freight to J.B. Hunt need acceptance, appointment and tracking events to reach the TMS without manual checking.

How ECOM helps: ECOM maps tender, response and status messages to your TMS or ERP and flags late or missing events.

What you gain: Planners see exceptions before a load is late.

Accessorial and invoice matching

Detention, layover and other accessorial charges from J.B. Hunt must be tied to the load and the agreed rate.

How ECOM helps: ECOM matches each invoice to the tender and status history and lists charges with no supporting event.

What you gain: Fewer overcharges paid and faster approval.

Workflows

Typical J.B. Hunt business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not J.B. Hunt's published process.

Tender to delivery

  1. 1Send 204 pickup or load tender
  2. 2Receive 990 tender response
  3. 3Receive 214 status events
  4. 4Confirm delivery

Freight bill audit

  1. 1Receive 210 freight invoice
  2. 2Compare to shipment record
  3. 3Spot weight, class or rate changes
  4. 4Approve or dispute

Documents and APIs

J.B. Hunt documents by program

General guidance. We could not verify J.B. Hunt's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not J.B. Hunt's confirmed requirements. Confirm the list, versions and programs with J.B. Hunt.

DocumentNameDirectionProgramStatusPurpose
204 Motor Carrier Load Tender To J.B. Hunt Not stated General guidance Commonly used to offer a load or pickup request to the carrier with pickup, delivery, equipment and reference details.
990 Response to a Load Tender From J.B. Hunt Not stated General guidance Commonly used to accept or decline the tendered load or pickup request.
214 Transportation Carrier Shipment Status Message From J.B. Hunt Not stated General guidance Commonly used to report pickup, in-transit events, appointment and delivery.
210 Motor Carrier Freight Details and Invoice From J.B. Hunt Not stated General guidance Commonly used to bill for freight with charge detail for freight payables.
997 Functional Acknowledgment Both directions Not stated General guidance Commonly used to confirm each file was received and could be read.

Connectivity

How companies connect

  • API and EDI connectivity

    J.B. Hunt says API and EDI connectivity creates lanes of communication that automate how information is shared with shippers.

    From J.B. Hunt's published documents

  • TMS integrations

    J.B. Hunt says it integrates with leading TMS vendors using advanced APIs.

    From J.B. Hunt's published documents

  • J.B. Hunt 360 platform and API catalog

    J.B. Hunt describes a self-service platform for quoting, booking, tracking and documents, with public APIs in an API catalog.

    From J.B. Hunt's published documents

Challenges

Common integration challenges

  • Accessorial disputes

    Detention and layover charges need timestamps from status events; without linked events each charge becomes a manual dispute.

  • Reference data quality

    Missing or inconsistent load, order or shipment references make documents hard to match across systems.

  • Exception ownership

    Late, missing or rejected messages need a clear owner on both sides so problems are fixed before they reach billing.

Automation options for J.B. Hunt shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. J.B. Hunt sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

General EDI flow

How EDI with J.B. Hunt typically works

The documents, their order and the timing are J.B. Hunt's to set; this is the general sequence most programs of this kind follow.

  1. 204 Motor Carrier Load Tender

    From you to J.B. Hunt

    Commonly used to offer a load or pickup request to the carrier with pickup, delivery, equipment and reference details.

  2. 990 Response to a Load Tender

    From J.B. Hunt to you

    Commonly used to accept or decline the tendered load or pickup request.

  3. 214 Transportation Carrier Shipment Status Message

    From J.B. Hunt to you

    Commonly used to report pickup, in-transit events, appointment and delivery.

  4. 210 Motor Carrier Freight Details and Invoice

    From J.B. Hunt to you

    Commonly used to bill for freight with charge detail for freight payables.

  5. 997 Functional Acknowledgment

    Both directions

    Commonly used to confirm each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your J.B. Hunt program

Each request goes to an ECOM EDI specialist with J.B. Hunt's name attached, so the reply starts from your program.

  • Review J.B. Hunt's requirements

    Send us J.B. Hunt's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect J.B. Hunt to your ERP

    Tenders, status and freight invoices in and out of the TMS, ERP and finance systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each J.B. Hunt document, then go live with monitoring from the first file.

    Plan testing and certification

J.B. Hunt integration FAQs

How does EDI or API integration with J.B. Hunt work?

J.B. Hunt offers API and EDI connectivity, TMS integrations and its 360 platform. Which documents run on EDI for your service line is agreed with J.B. Hunt's onboarding team.

Which documents does J.B. Hunt list for EDI?

J.B. Hunt does not publish a document list that this guide could read. The documents shown (204, 990, 214, 210, 997) are commonly used for this type of business and are labeled as typical; your agreed set is confirmed during onboarding.

Why match status events to freight invoices?

Matching shows whether a charge is supported by a pickup, delivery or accessorial event, which is the basis of freight audit and dispute handling.

How does onboarding with J.B. Hunt usually work?

J.B. Hunt says a dedicated onboarding team supports integration and testing one-on-one. Typically you agree the document set and connection, map to your systems, test until the documents are accepted, then go live with monitoring. Timing depends on J.B. Hunt's requirements, test cycles and your ERP.

Does this guide mean ECOM works with J.B. Hunt?

This is an independent integration guide. It does not indicate an endorsement, partnership or approval by J.B. Hunt.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. J.B. Hunt sets its own requirements and can change them at any time; your J.B. Hunt implementation guide, supplier portal or account contact is the authoritative source for your program.

Request J.B. Hunt integration assistance

Tell us about your J.B. Hunt program, documents and ERP. We will outline the connection, mapping and testing plan.