Third-Party Logistics integration

States Logistics Services EDI integration

How EDI and API integration with States Logistics Services typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with States Logistics Services.

At a glance

States Logistics Services integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific States Logistics Services program or a customer relationship.

Illustration of a warehouse with dock doors and stacked pallets, representing the third-party logistics industry that States Logistics Services operates in.
Industry. Third-Party Logistics: where States Logistics Services operates.
Workflow diagram: your ERP and warehouse systems exchange documents with States Logistics Services through ECOM. You send 940, 856; you receive 945, 944, 947, 846; 997 acknowledgments go both ways. Your systems ERP · WMS · finance ECOM integration map · validate · connect · monitor States Logistics Services 940 856 940 856 945 944 947 846 945 944 947 846 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Shipping orders re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about States Logistics Services

Tell us which documents you exchange with States Logistics Services, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with States Logistics Services.

  • Review of States Logistics Services' requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
States Logistics Services

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How States Logistics Services integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Provider API · Client portal or WMS connection
States Logistics ServicesIts program, documents and requirements
  1. ConfirmConfirm your States Logistics Services program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding States Logistics Services integration

Who this is for: Brands, manufacturers, distributors and retailers that store or fulfill through States Logistics Services, and their order, inventory and finance teams.

Scope: States Logistics Services's own capability statement is cited; everything else on this page is typical practice, confirmed with States Logistics Services during onboarding.

States Logistics Services provides warehousing and logistics services. ECOM's directory lists it under warehousing. Clients of a warehousing or fulfillment provider typically send shipping orders and inbound notices, and receive shipping advice, receipts and inventory reports.

What matters most with a contract logistics, warehousing or fulfillment provider is that shipped and received quantities return to your ERP quickly and match what physically moved. States Logistics Services' own EDI or API specification is not part of this guide and no States Logistics Services document was read: treat what follows as typical practice for a contract logistics, warehousing or fulfillment provider, and confirm the documents, X12 version, delivery method and testing steps with States Logistics Services.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where States Logistics Services integration gets complicated

Typical requirements—confirm with your trading partner.

Outbound order flow

Orders must reach the warehouse quickly and shipped quantities must return promptly to the ERP and billing.

How ECOM helps: ECOM connects shipping orders (940) and shipping advice (945) to your ERP, so orders reach the facility quickly and shipped quantities return for billing, with late or missing advices flagged.

What you gain: Orders ship and bill sooner, and fewer shipments wait on missing documents.

Receiving, inventory and shipping

Warehousing flows exchange inbound notices, shipping orders, shipping advice and inventory data, and have to reconcile stock between the client ERP and the warehouse system.

How ECOM helps: ECOM maps receipt advice (944) and adjustments (947) and inventory data to your ERP so received quantities and stock status post without re-keying, and differences are listed for review.

What you gain: Inventory in your ERP matches the facility sooner, and receiving discrepancies are visible early.

Returns processing

Returned goods need receipt, disposition and credit documents that reconcile.

How ECOM helps: ECOM monitors each document and acknowledgment, flags rejected, late or mismatched ones and routes each exception to a named owner with the document history attached.

What you gain: Problems are corrected before they turn into deductions, write-offs or delayed payment.

Onboarding a new client

Each client brings its own documents, item data and rules to the warehouse or brokerage system.

How ECOM helps: ECOM runs onboarding as a project: we confirm States Logistics Services's requirements with you, map the documents, build the connection and run test cycles until States Logistics Services accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Workflows

Typical States Logistics Services business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not States Logistics Services' published process.

Outbound order

  1. 1Send 940 shipping order
  2. 2Warehouse picks and packs
  3. 3Receive 945 shipping advice
  4. 4Update ERP and invoice

Inbound receipt

  1. 1Send inbound notice
  2. 2Warehouse receives goods
  3. 3Receive 944 receipt advice
  4. 4Update inventory

Documents and APIs

States Logistics Services documents by program

General guidance. We could not verify States Logistics Services' EDI requirements from a published source, so these are documents commonly exchanged in this industry, not States Logistics Services' confirmed requirements. Confirm the list, versions and programs with States Logistics Services.

DocumentNameDirectionProgramStatusPurpose
940 Warehouse Shipping Order To States Logistics Services Not stated General guidance Typically tells a warehouse what to pick, pack and ship.
945 Warehouse Shipping Advice From States Logistics Services Not stated General guidance Typically confirms what the warehouse shipped.
944 Warehouse Stock Transfer Receipt Advice From States Logistics Services Not stated General guidance Typically confirms what the warehouse received into stock.
947 Warehouse Inventory Adjustment Advice From States Logistics Services Not stated General guidance Typically reports stock adjustments such as damage or cycle-count changes.
846 Inventory Inquiry/Advice From States Logistics Services Not stated General guidance Typically shares inventory positions or availability between the two sides.
856 Ship Notice/Manifest To States Logistics Services Not stated General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Warehouse and fulfillment providers commonly exchange EDI with clients over AS2, SFTP or a value-added network.

    General guidance

  • Provider API

    Many providers also offer order, inventory and shipment APIs next to EDI.

    General guidance

  • Client portal or WMS connection

    Some providers work through a client portal, or a connection to their warehouse management system, instead of or beside direct EDI.

    General guidance

Challenges

Common integration challenges

  • Order latency

    Late orders miss carrier cut-offs. Confirm how it applies with States Logistics Services.

  • Inventory accuracy

    Adjustments must flow back to the ERP. Details depend on your agreement with States Logistics Services.

  • Shipment confirmation

    Shipping advice has to match invoices. Ask States Logistics Services how this applies to your program.

  • Multiple clients and sites

    Rules vary by client and facility. Requirements vary by program.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by States Logistics Services. ECOM works from them during mapping and testing.

Automation options for States Logistics Services shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. States Logistics Services sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect States Logistics Services documents to your ERP

ECOM connects the orders, receipts, shipping advice and inventory documents you exchange with States Logistics Services to your ERP and warehouse systems, so inventory and billing stay in step and exceptions are visible early.

Industry

3PL and Warehousing

See how ECOM supports third-party logistics providers and their clients.

Solution

Supply Chain Visibility

See orders, shipments and exceptions across your trading partners in one view.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with States Logistics Services typically works

The documents, their order and the timing are States Logistics Services' to set; this is the general sequence most programs of this kind follow.

  1. 940 Warehouse Shipping Order

    From you to States Logistics Services

    Typically tells a warehouse what to pick, pack and ship.

  2. 945 Warehouse Shipping Advice

    From States Logistics Services to you

    Typically confirms what the warehouse shipped.

  3. 944 Warehouse Stock Transfer Receipt Advice

    From States Logistics Services to you

    Typically confirms what the warehouse received into stock.

  4. 947 Warehouse Inventory Adjustment Advice

    From States Logistics Services to you

    Typically reports stock adjustments such as damage or cycle-count changes.

  5. 846 Inventory Inquiry/Advice

    From States Logistics Services to you

    Typically shares inventory positions or availability between the two sides.

  6. 856 Ship Notice/Manifest

    From you to States Logistics Services

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  7. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your States Logistics Services program

Each request goes to an ECOM EDI specialist with States Logistics Services' name attached, so the reply starts from your program.

  • Review States Logistics Services' requirements

    Send us States Logistics Services' guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect States Logistics Services to your ERP

    Warehouse orders, receipts, shipments and inventory in and out of the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each States Logistics Services document, then go live with monitoring from the first file.

    Plan testing and certification

States Logistics Services integration FAQs

What does a 945 tell my ERP?

The 945 warehouse shipping advice tells the client what the warehouse actually shipped, so the ERP can update stock and trigger billing.

How does onboarding with States Logistics Services usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on States Logistics Services' requirements, test cycles and your ERP.

Does this guide mean States Logistics Services endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by States Logistics Services.

Does States Logistics Services use EDI with clients?

Warehousing and fulfillment providers commonly exchange EDI or API data with clients. This page does not include States Logistics Services' requirements; confirm the documents and connection method with States Logistics Services.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. States Logistics Services sets its own requirements and can change them at any time; your States Logistics Services implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • States Logistics Services: company description Background, not checked against a company source The one-sentence description of States Logistics Services comes from general public knowledge and was not checked against States Logistics Services' own website for this page.
  • States Logistics Services: no company document read Background, not checked against a company source No States Logistics Services supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request States Logistics Services integration assistance

Tell us about your States Logistics Services program, documents and ERP. We will outline the connection, mapping and testing plan.