Third-Party Logistics integration

United States Cold Storage EDI integration

How EDI and API integration with United States Cold Storage typically works: documents, workflows, onboarding and common problems, as typical practice to confirm with United States Cold Storage.

At a glance

United States Cold Storage integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific United States Cold Storage program or a customer relationship.

Illustration of a warehouse with dock doors and stacked pallets, representing the third-party logistics industry that United States Cold Storage operates in.
Industry. Third-Party Logistics: where United States Cold Storage operates.
Workflow diagram: your ERP and warehouse systems exchange documents with United States Cold Storage through ECOM. You send 940, 856; you receive 945, 944, 947, 846; 997 acknowledgments go both ways. Your systems ERP · WMS · finance ECOM integration map · validate · connect · monitor United States Cold Storage 940 856 940 856 945 944 947 846 945 944 947 846 997 both ways
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Shipping orders re-keyed Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about United States Cold Storage

Tell us which documents you exchange with United States Cold Storage, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with United States Cold Storage.

  • Review of United States Cold Storage's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
United States Cold Storage

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How United States Cold Storage integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringAS2, SFTP or VAN · Provider API · Client portal or WMS connection
United States Cold StorageIts program, documents and requirements
  1. ConfirmConfirm your United States Cold Storage program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding United States Cold Storage integration

Who this is for: Food, beverage and life sciences companies that store or ship through United States Cold Storage, and their planning and finance teams.

Scope: This guide describes typical practice for this kind of trading relationship; United States Cold Storage's own program details are confirmed during onboarding.

United States Cold Storage operates temperature-controlled warehouses. ECOM's directory lists it under cold chain logistics. Clients of cold chain providers handle temperature-controlled storage and transport, lot and date tracking and strict receiving windows.

With a cold chain logistics provider, the hard part is keeping orders, receipts and inventory positions in step between your ERP and the facility. United States Cold Storage's own EDI or API specification is not part of this guide and no United States Cold Storage document was read: treat what follows as typical practice for a cold chain logistics provider, and confirm the documents, X12 version, delivery method and testing steps with United States Cold Storage.

ECOM maps the documents to your ERP and warehouse systems, tests them with the trading partner, monitors every file after go-live and handles partner changes, as software, as a managed service or both.

Business scenarios

Where United States Cold Storage integration gets complicated

Typical requirements—confirm with your trading partner.

Lot and expiry tracking

Lot and date information must move between ERP, facility and shipping documents.

How ECOM helps: ECOM connects shipment and status documents to your ERP, WMS or TMS and shows where each one stands, so late or missing messages are seen early.

What you gain: Teams see current status, and fewer shipments are held up by missing documents.

Temperature-controlled handling

Cold chain adds temperature and date data and short receiving windows. Exceptions need clear reporting to the client.

How ECOM helps: ECOM monitors each document and acknowledgment, flags rejected, late or mismatched ones and routes each exception to a named owner with the document history attached.

What you gain: Problems are corrected before they turn into deductions, write-offs or delayed payment.

Short receiving windows

Inbound appointments are tight, so notices must arrive before the truck.

How ECOM helps: ECOM maps receipt advice (944) and adjustments (947) and inventory data to your ERP so received quantities and stock status post without re-keying, and differences are listed for review.

What you gain: Inventory in your ERP matches the facility sooner, and receiving discrepancies are visible early.

Onboarding a new client

Each client brings its own documents, item data and rules to the warehouse or brokerage system.

How ECOM helps: ECOM runs onboarding as a project: we confirm United States Cold Storage's requirements with you, map the documents, build the connection and run test cycles until United States Cold Storage accepts them.

What you gain: A shorter, more predictable path to the first accepted live document.

Workflows

Typical United States Cold Storage business workflows

Typical requirements—confirm with your trading partner. Typical flows in this industry, not United States Cold Storage's published process.

Outbound order

  1. 1Send 940 shipping order
  2. 2Facility picks and packs
  3. 3Receive 945 shipping advice
  4. 4Update ERP and invoice

Inbound receipt

  1. 1Send inbound notice
  2. 2Facility receives product
  3. 3Receive 944 receipt advice
  4. 4Update inventory

Documents and APIs

United States Cold Storage documents by program

General guidance. We could not verify United States Cold Storage's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not United States Cold Storage's confirmed requirements. Confirm the list, versions and programs with United States Cold Storage.

DocumentNameDirectionProgramStatusPurpose
940 Warehouse Shipping Order To United States Cold Storage Not stated General guidance Typically tells a warehouse what to pick, pack and ship.
945 Warehouse Shipping Advice From United States Cold Storage Not stated General guidance Typically confirms what the warehouse shipped.
944 Warehouse Stock Transfer Receipt Advice From United States Cold Storage Not stated General guidance Typically confirms what the warehouse received into stock.
947 Warehouse Inventory Adjustment Advice From United States Cold Storage Not stated General guidance Typically reports stock adjustments such as damage or cycle-count changes.
846 Inventory Inquiry/Advice From United States Cold Storage Not stated General guidance Typically shares inventory positions or availability between the two sides.
856 Ship Notice/Manifest To United States Cold Storage Not stated General guidance Typically tells the receiver what is on each shipment, often with carton or pallet label details.
997 Functional Acknowledgment Both directions Not stated General guidance Typically confirms that each file was received and could be read.

Connectivity

How companies connect

  • AS2, SFTP or VAN

    Warehouse and fulfillment providers commonly exchange EDI with clients over AS2, SFTP or a value-added network.

    General guidance

  • Provider API

    Many providers also offer order, inventory and shipment APIs next to EDI.

    General guidance

  • Client portal or WMS connection

    Some providers work through a client portal, or a connection to their warehouse management system, instead of or beside direct EDI.

    General guidance

Challenges

Common integration challenges

  • Lot and date data

    Errors cause holds and write-offs. Confirm how it applies with United States Cold Storage.

  • Timing

    Short windows leave little room for delays.

  • Inventory accuracy

    Adjustments must reach the ERP. Ask United States Cold Storage how this applies to your program.

  • Exceptions

    Temperature and quality exceptions need clear reporting.

  • Program-specific details

    The documents, identifiers, versions and test steps for your program are set by United States Cold Storage. ECOM works from them during mapping and testing.

Automation options for United States Cold Storage shippers

Four ways to automate. One foundation.

ECOM helps you automate the exchange, connect it to your systems, and see what needs action. United States Cold Storage sets its own requirements; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect United States Cold Storage documents to your ERP

ECOM connects the orders, receipts, shipping advice and inventory documents you exchange with United States Cold Storage to your ERP and warehouse systems, so inventory and billing stay in step and exceptions are visible early.

Industry

3PL and Warehousing

See how ECOM supports third-party logistics providers and their clients.

Industry

Food and Beverage

See how ECOM supports EDI for food and beverage suppliers and buyers.

Solution

Supply Chain Visibility

See orders, shipments and exceptions across your trading partners in one view.

Service

Fully Managed EDI

Have ECOM run your EDI connections, monitoring and partner changes.

General EDI flow

How EDI with United States Cold Storage typically works

The documents, their order and the timing are United States Cold Storage's to set; this is the general sequence most programs of this kind follow.

  1. 940 Warehouse Shipping Order

    From you to United States Cold Storage

    Typically tells a warehouse what to pick, pack and ship.

  2. 945 Warehouse Shipping Advice

    From United States Cold Storage to you

    Typically confirms what the warehouse shipped.

  3. 944 Warehouse Stock Transfer Receipt Advice

    From United States Cold Storage to you

    Typically confirms what the warehouse received into stock.

  4. 947 Warehouse Inventory Adjustment Advice

    From United States Cold Storage to you

    Typically reports stock adjustments such as damage or cycle-count changes.

  5. 846 Inventory Inquiry/Advice

    From United States Cold Storage to you

    Typically shares inventory positions or availability between the two sides.

  6. 856 Ship Notice/Manifest

    From you to United States Cold Storage

    Typically tells the receiver what is on each shipment, often with carton or pallet label details.

  7. 997 Functional Acknowledgment

    Both directions

    Typically confirms that each file was received and could be read.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your United States Cold Storage program

Each request goes to an ECOM EDI specialist with United States Cold Storage's name attached, so the reply starts from your program.

  • Review United States Cold Storage's requirements

    Send us United States Cold Storage's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect United States Cold Storage to your ERP

    Warehouse orders, receipts, shipments and inventory in and out of the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each United States Cold Storage document, then go live with monitoring from the first file.

    Plan testing and certification

United States Cold Storage integration FAQs

Does United States Cold Storage use EDI with clients?

Cold chain providers commonly exchange EDI or API data with clients. This page does not include United States Cold Storage's requirements.

Does EDI carry temperature readings?

Temperature monitoring usually runs in separate systems. Confirm what data the provider shares and in which format.

Which EDI documents are typical for a cold chain logistics provider?

Typical documents are 940, 945, 944, 947, 846, 856, 997. That is general practice, not United States Cold Storage's published list.

How does onboarding with United States Cold Storage usually work?

Typically you get the specification from the trading partner, agree the connection, map to your systems, test until the partner accepts the documents, then go live with monitoring. Timing depends on United States Cold Storage's requirements, test cycles and your ERP.

Does this guide mean United States Cold Storage endorses ECOM?

No. This is an independent integration guide. It does not indicate an endorsement, partnership or approval by United States Cold Storage.

Sources and accuracy

This guide summarizes publicly available information as of November 2026. United States Cold Storage sets its own requirements and can change them at any time; your United States Cold Storage implementation guide, supplier portal or account contact is the authoritative source for your program.

  • ASC X12: transaction set reference (standards body) Standards reference
  • United States Cold Storage: company description Background, not checked against a company source The one-sentence description of United States Cold Storage comes from general public knowledge and was not checked against United States Cold Storage's own website for this page.
  • United States Cold Storage: no company document read Background, not checked against a company source No United States Cold Storage supplier, customer or integration document was read for this page. Everything shown is typical practice for this type of company.

Request United States Cold Storage integration assistance

Tell us about your United States Cold Storage program, documents and ERP. We will outline the connection, mapping and testing plan.