Telecom and Media integration

AT&T supplier EDI integration

A guide for suppliers connecting with AT&T, covering order-cycle documents, invoice matching and ERP integration.

At a glance

AT&T integration, in three pictures

The industry, the document flow and the outcome for your team. Illustrations only: they show typical practice, not a specific AT&T program or a customer relationship.

Illustration of a cell tower with signal waves and a screen, representing the telecom and media industry that AT&T operates in. M150 40a40 40 0 0 1 0 0
Industry. Telecom and Media: where AT&T operates.
Workflow diagram: your ERP and warehouse systems exchange documents with AT&T through ECOM. You send 855, 856, 810; you receive 850, 824, 754. Your systems ERP · warehouse · finance ECOM integration map · validate · connect · monitor AT&T 855 856 810 855 856 810 850 824 754 850 824 754
Workflow. Documents in each direction. Orange: you send. Blue: you receive. Typical, not confirmed.
Comparison diagram: without integration, documents are re-keyed, files are emailed and rejections are found late; with ECOM, documents are mapped to your ERP, validated and monitored, and exceptions are visible early. Without integration Orders re-keyed by hand Files emailed or uploaded Rejections found late With ECOM Documents mapped to your ERP Every file validated and monitored Exceptions visible early
Outcome. From manual handling to a monitored flow. No figures: results depend on your setup.

Talk to an EDI/API Expert about AT&T

Tell us which documents you exchange with AT&T, which ERP you run and when you need to be live. A specialist will outline the connection, mapping and testing plan. This page is a guide based on typical practice; it does not mean ECOM works with AT&T.

  • Review of AT&T's requirements with you, once you have them
  • EDI and API integration with your ERP and warehouse systems
  • Monitoring and managed service after go-live, if you want it

Prefer to call? Sales 972-836-7750 or email sales@ecom-specialist.com.

Takes about 30 seconds. Phone and note are optional.

Your request is about

Trading partner
AT&T

When should we talk?

Times are in your time zone. We use this to schedule the conversation.

We use your details only to respond to your request. See our privacy notice. Prefer to talk? Call Sales at 972-836-7750.

Integration and onboarding

How AT&T integration fits your systems

Your systemsERP, WMS and accounting
ECOMMapping, validation, connectivity and monitoringEDI per AT&T specifications · Current and legacy identifiers
AT&TIts program, documents and requirements
  1. ConfirmConfirm your AT&T program, role and the documents it requires.
  2. MapMap each document to your ERP fields and business rules.
  3. ConnectConfigure the connection and security the program needs.
  4. TestTest against the applicable specifications and acknowledgments.
  5. Go liveGo live with monitoring, alerts and exception handling.
Typical implementation path. Exact requirements are confirmed against the applicable specifications during onboarding.

Overview

Understanding AT&T integration

Who this is for: Equipment, device, accessory and materials suppliers selling to AT&T.

Scope: This guide describes typical practice for this kind of trading relationship; AT&T's own program details are confirmed during onboarding.

AT&T buys network equipment, devices, accessories and materials from many suppliers and exchanges order-cycle documents with them electronically.

Invoice accuracy is a recurring theme. When invoices do not match, payment can be delayed.

AT&T provides its specifications to suppliers directly. Suppliers should confirm the document set and versions for their relationship, and note that some catalogs list separate legacy and current AT&T identifiers.

As general practice for suppliers to large telecom companies, purchase orders arrive by EDI, suppliers acknowledge them, send ship notices before deliveries arrive and invoice against the original purchase order. Invoices that match the order and ship notice line by line are the easiest to pay, so integration usually starts with the ERP's order and invoice data. Specifications and identifiers can differ between business units, so confirm the current set with AT&T before mapping.

Workflows

Typical AT&T business workflows

General guidance: typical flows in this industry, not AT&T's published process.

AT&T order cycle

  1. 1Receive 850 purchase order
  2. 2Send 855 acknowledgment
  3. 3Send 856 ship notice
  4. 4Send 810 invoice
  5. 5Review 824 application advice

Documents and APIs

AT&T documents by program

General guidance. We could not verify AT&T's EDI requirements from a published source, so these are documents commonly exchanged in this industry, not AT&T's confirmed requirements. Confirm the list, versions and programs with AT&T.

DocumentNameDirectionProgramStatusPurpose
850 Purchase Order From AT&T Not stated General guidance AT&T orders products from suppliers.
855 Purchase Order Acknowledgment To AT&T Not stated General guidance The supplier confirms the order.
856 Advance Ship Notice To AT&T Not stated General guidance Describes each shipment.
810 Invoice To AT&T Not stated General guidance Bills AT&T and must align with the order and shipment.
824 Application Advice From AT&T Not stated General guidance Reports errors in submitted documents.
754 Routing Instructions From AT&T Not stated General guidance Provides shipment routing where used.

Connectivity

How companies connect

  • EDI per AT&T specifications

    Suppliers exchange documents according to specifications provided by AT&T.

    General guidance

  • Current and legacy identifiers

    AT&T has not published this in a source we could verify.

    General guidance

Challenges

Common integration challenges

  • Three-way matching

    Invoices must align with the purchase order and ship notice to avoid payment delays.

  • Acting on application advice

    Errors reported on 824 documents need prompt correction.

  • Obtaining official specifications

    Specifications come from AT&T directly, so onboarding depends on AT&T contacts.

Automation options for AT&T suppliers

Four ways to automate. One foundation.

ECOM helps you automate them, meet AT&T's labeling and ship notice requirements, and see what needs action. AT&T sets its program's rules; ECOM confirms which options fit yours.

PRISM Supply Chain Automation Foundation

One platform beneath every option. Use one, or combine them for different partners and documents.

Compliance and actionable visibility

Connect order processing, shipping documentation, trading partner requirements, and performance monitoring through one coordinated workflow. These capabilities help teams improve shipment accuracy, reduce manual work, address compliance risks, and respond to exceptions before they affect customers.

Discuss Your Trading Partner Requirements

Connect AT&T documents to your ERP

ECOM integrates AT&T order-cycle documents with your ERP so invoices reference the original order exactly and errors reach the right team quickly.

Industry

Telecom and Media

See how ECOM supports telecom supply chains.

Product

PRISM-SCV

Monitor invoice matches and application advice for AT&T orders.

General EDI flow

How EDI with AT&T typically works

The documents, their order and the timing are AT&T's to set; this is the general sequence most programs of this kind follow.

  1. 850 Purchase Order

    From AT&T to you

    AT&T orders products from suppliers.

  2. 855 Purchase Order Acknowledgment

    From you to AT&T

    The supplier confirms the order.

  3. 856 Advance Ship Notice

    From you to AT&T

    Describes each shipment.

  4. 810 Invoice

    From you to AT&T

    Bills AT&T and must align with the order and shipment.

  5. 824 Application Advice

    From AT&T to you

    Reports errors in submitted documents.

  6. 754 Routing Instructions

    From AT&T to you

    Provides shipment routing where used.

Need help with the specification?

Tell ECOM which program you are in and what the partner has given you. We help you read it, confirm the applicable requirements, map them to your systems and test against them. Do not send passwords or EDI identifiers with your request.

Next step

Get help with your AT&T program

Each request goes to an ECOM EDI specialist with AT&T's name attached, so the reply starts from your program.

  • Review AT&T's requirements

    Send us AT&T's guide or your program details; we explain the documents, rules and options for meeting them.

    Request a requirements review
  • Connect AT&T to your ERP

    Orders in, ship notices and invoices out, from the ERP and warehouse systems you already run.

    Discuss ERP integration
  • Testing and certification

    Build, test and certify each AT&T document, then go live with monitoring from the first file.

    Plan testing and certification
  • Shipping labels and ASNs

    Labels and ship notices that match AT&T's rules, to help avoid receiving problems and compliance deductions.

    Review shipping compliance

AT&T integration FAQs

Which EDI documents does AT&T use with suppliers?

The 850, 855, 856, 810, 824 and 754 are commonly used in this industry, but AT&T has not published its list in a source we could verify, so confirm it with AT&T.

Why do AT&T invoices get rejected?

Common causes include purchase order references that do not match exactly and invoices that do not align with the order and ship notice.

Where do suppliers get AT&T specifications?

Directly from AT&T, through its supplier onboarding contacts. Request the current specification for each document before you build maps.

Is ECOM an AT&T partner?

This page is an integration guide and does not indicate a partnership with AT&T. ECOM builds integrations to published requirements.

Sources and accuracy

This guide summarizes publicly available information as of October 2026. AT&T sets its own requirements and can change them at any time; your AT&T implementation guide, supplier portal or account contact is the authoritative source for your program.

Request AT&T integration assistance

Tell us about your AT&T program, documents and ERP. We will outline the connection, mapping and testing plan.